vs.

      New Holland F156.6 vs. John Deere 870D

      6 reasons to buy New Holland F156.6:

      Operation

      Hydraulic system fluid volume 185 l. and 53 l. 71 % more or 132 l.
      Front axle standard operating weight 4496 kg and 4173 kg 7 % more or 323 kg

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev

      Hydraulic system

      Pump flow rate 126 l/min and 207 l/min 39 % less or 81 l/min

      Front Axle

      Clearance 646 mm and 638 mm 1 % more or 8 mm

      Circle

      Maximum lifting above ground level 480 mm and 437 mm 9 % more or 43 mm

      18 reasons to buy John Deere 870D:

      Steerage

      Turn radius 7 m and 8250 m 100 % less or 8243 m

      Sizes

      Front part clearance 638 mm and 141 mm 78 % more or 497 mm

      Operation

      Rear axle maximum operating weight 14777 kg and 11500 kg 22 % more or 3277 kg
      Transmission fluid volume 22.7 l. and 21 l. 7 % more or 1.7 l.
      Each tandem case fluid volume 75.7 l. and 68 l. 10 % more or 7.7 l.
      Fuel Capacity 401.2 l. and 275 l. 31 % more or 126.2 l.
      Generator current strength 100 amperes and 70 amperes 30 % more or 30 amperes
      Rear axle standard operating weight 11589 kg and 9841 kg 15 % more or 1748 kg
      Front axle maximum operating weight 7268 kg and 5200 kg 28 % more or 2068 kg

      Motor

      Maximum power 175.2 kW and 130.5 kW 26 % more or 44.7 kW
      Effective speeds output 5-6 149 kW and 130.5 kW 12 % more or 18.5 kW
      Displacement 8.1 l. and 5.9 l. 27 % more or 2.2 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 8 and 3 62 % more or 5
      Maximum forward speed 41.1 km/h and 37.4 km/h 9 % more or 3.7 km/h
      Maximum reverse gear 41.1 km/h and 27.1 km/h 34 % more or 14.0 km/h

      Circle

      Maximum radius outside left tyres 2320 mm and 2520 mm 8 % less or 200 mm
      Right maximum radius outside tyres 2310 mm and 3210 mm 28 % less or 900 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 28 degrees and 22 degrees

      Sizes

      Height to cab upper part 3373 mm and 3180 mm
      Between tyres width 2595 mm and 2510 mm
      Dimensional length 9975 mm and 8804 mm
      Wheelbase 5983 mm and 6120 mm
      Blade base 2504 mm and 2533 mm
      Dual axis wheelbase 1544 mm and 1540 mm

      Operation

      Total maximum operating weight 16200 kg and 22045 kg
      Tyre size 17.5R25EM and 14.00R24 Radial PR
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14336 kg and 15760 kg

      Motor

      Cylinders number 6 and 6
      Model CNH 4-stroke cycle, naturally aspirated diesel engine and 6081H
      Aspiration turbocharging water cooling and Turbocharged engine with subsequent cooling of charging air by oncoming air flow

      Hydraulic system

      Type of pump Axial cam pump, variable displacement piston pump and variable displacement piston pump
      Overflow valve pressure 20000 kPa and 18960.6 kPa

      Gear box

      Transmission type powershift transmission and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 21 degrees and 20 degrees
      General fluctuations 15 degrees and 32 degrees

      Dump

      Mouldboard height 152 mm and 686 mm
      Mouldboard thickness 19 mm and 25 mm
      Left lateral displacement 645 mm and 680 mm
      Lateral right shift 755 mm and 680 mm
      Mouldboard width 3660 mm and 4300 mm

      Circle

      Rotating degrees and 360 degrees
      Left shift 645 mm and 787 mm
      Right shift 755 mm and 724 mm

      Images

      Sizes

      8. Blade base 2504 mm 8. Blade base 2533 mm
      1. Dimensional length 9975 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2595 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3373 mm 3. Height to cab upper part 3180 mm
      4. Wheelbase 5983 mm 4. Wheelbase 6120 mm
      6. Front part clearance 141 mm 6. Front part clearance 638 mm
      7. Dual axis wheelbase 1544 mm 7. Dual axis wheelbase 1540 mm