vs.

      New Holland F170 vs. Caterpillar 12G

      11 reasons to buy New Holland F170:

      Operation

      Rear axle maximum operating weight 10300 kg and 9800 kg 5 % more or 500 kg
      Generator current strength 70 amperes and 19 amperes 73 % more or 51 amperes
      Fuel Capacity 340 l. and 283 l. 17 % more or 57 l.
      Hydraulic system fluid volume 95 l. and 76 l. 20 % more or 19 l.

      Hydraulic system

      Pump flow rate 183 l/min and 193 l/min 5 % less or 10 l/min

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Maximum forward speed 43 km/h and 41 km/h 5 % more or 2 km/h

      Front Axle

      Clearance 622 mm and 610 mm 2 % more or 12 mm

      Dump

      Maximum cutting depth 712 mm and 450 mm 37 % more or 262 mm

      Circle

      Maximum radius outside left tyres 1735 mm and 1830 mm 5 % less or 95 mm
      Maximum lifting above ground level 444 mm and 438 mm 1 % more or 6 mm

      11 reasons to buy Caterpillar 12G:

      Operation

      Front axle maximum operating weight 4530 kg and 4250 kg 6 % more or 280 kg
      Each tandem case fluid volume 64 l. and 29 l. 55 % more or 35 l.
      Oil system fluid volume 29 l. and 19 l. 34 % more or 10 l.
      Cooling system fluid volume 47 l. and 40 l. 15 % more or 7 l.
      Transmission fluid volume 87 l. and 19 l. 78 % more or 68 l.

      Motor

      Displacement 10.5 l. and 8.3 l. 21 % more or 2.2 l.

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum reverse gear 41 km/h and 28.5 km/h 30 % more or 12.5 km/h

      Circle

      Right maximum radius outside tyres 1870 mm and 1895 mm 1 % less or 25 mm
      Blade tilt front angle 90 degrees and 40 degrees 56 % more or 50 degrees
      Blade tilt rear angle 90 degrees and 5 degrees 94 % more or 85 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 50 degrees
      Turn radius 7.3 m and 7.3 m

      Sizes

      Height to cab upper part 3340 mm and 3330 mm
      Dimensional length 8521 mm and 8310 mm
      Between tyres width 2510 mm and 2410 mm
      Wheelbase 6219 mm and 5920 mm
      Blade base 2562 mm and 2570 mm
      Dual axis wheelbase 1594 mm and 1520 mm

      Operation

      Operating voltage 24 V and 24 V
      Total maximum operating weight 14550 kg and 14330 kg

      Motor

      Manufacturer Cummins and Caterpillar
      Power measured at 2200 rev / min and 2200 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump full hydraulic system with load sensing and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume
      Overflow valve pressure 17900 kPa and 14823.7 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 19 degrees and 32 degrees

      Dump

      Mouldboard width 3962 mm and 3650 mm
      Mouldboard height 671 mm and 610 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 533 mm and 670 mm
      Lateral right shift 686 mm and 520 mm

      Circle

      Diameter 1753 mm and 1530 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8521 mm 1. Dimensional length 8310 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2410 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3330 mm
      4. Wheelbase 6219 mm 4. Wheelbase 5920 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1520 mm
      8. Blade base 2562 mm 8. Blade base 2570 mm