- Home/
- Comparison/
- Grader/
- New Holland F170 vs. Caterpillar 12H NA
New Holland F170 vs. Caterpillar 12H NA
6 reasons to buy New Holland F170:
Steerage
Turn radius | 7.3 m and 7.4 m | 1 % less or 0.1 m |
Operation
Generator current strength | 70 amperes and 35 amperes | 50 % more or 35 amperes |
Fuel Capacity | 340 l. and 284 l. | 16 % more or 56 l. |
Hydraulic system fluid volume | 95 l. and 80 l. | 16 % more or 15 l. |
Hydraulic system
Pump flow rate | 183 l/min and 196 l/min | 7 % less or 13 l/min |
Gear box
Maximum forward speed | 43 km/h and 39.7 km/h | 8 % more or 3.3 km/h |
4 reasons to buy Caterpillar 12H NA:
Motor
Displacement | 10.5 l. and 8.3 l. | 21 % more or 2.2 l. |
Gear box
Reverse gears number | 6 and 4 | 33 % more or 2 |
Maximum reverse gear | 31.7 km/h and 28.5 km/h | 10 % more or 3.2 km/h |
Circle
Maximum lifting above ground level | 480 mm and 444 mm | 7 % more or 36 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 20 degrees |
Sizes
Blade base | 2562 mm and 2570 mm |
Height to cab upper part | 3340 mm and 3110 mm |
Dimensional length | 8521 mm and 8570 mm |
Between tyres width | 2510 mm and 2440 mm |
Wheelbase | 6219 mm and 6090 mm |
Operation
Tyre size | 13.00 x 24 (12PR) and 13-24 10PR (G-2) |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Cummins and Caterpillar |
Model | 6 CTAA 8.3 2 level and 3306 DIT |
Hydraulic system
Type of pump | full hydraulic system with load sensing and Axial-piston pump |
Overflow valve pressure | 17900 kPa and 24131.6 kPa |
Gear box
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 18 degrees and 18 degrees |
General fluctuations | 19 degrees and 32 degrees |
Dump
Mouldboard width | 3962 mm and 3660 mm |
Mouldboard thickness | 22 mm and 22 mm |
Mouldboard height | 671 mm and 610 mm |
Images
Sizes
1. Dimensional length | 8521 mm | 1. Dimensional length | 8570 mm |
2. Between tyres width | 2510 mm | 2. Between tyres width | 2440 mm |
3. Height to cab upper part | 3340 mm | 3. Height to cab upper part | 3110 mm |
4. Wheelbase | 6219 mm | 4. Wheelbase | 6090 mm |
8. Blade base | 2562 mm | 8. Blade base | 2570 mm |