vs.

      New Holland F170 vs. Caterpillar 14H

      9 reasons to buy New Holland F170:

      Steerage

      Turn radius 7.3 m and 7.9 m 8 % less or 0.6 m

      Sizes

      Rear ground clearance 610 mm and 378 mm 38 % more or 232 mm

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump flow rate 183 l/min and 243 l/min 25 % less or 60 l/min

      Gear box

      Maximum forward speed 43 km/h and 42.7 km/h 1 % more or 0.3 km/h

      Dump

      Maximum cutting depth 712 mm and 438 mm 38 % more or 274 mm

      Circle

      Right maximum radius outside tyres 1895 mm and 2082 mm 9 % less or 187 mm
      Maximum lifting above ground level 444 mm and 419 mm 6 % more or 25 mm
      Maximum radius outside left tyres 1735 mm and 2057 mm 16 % less or 322 mm

      12 reasons to buy Caterpillar 14H:

      Operation

      Hydraulic system fluid volume 125 l. and 95 l. 24 % more or 30 l.
      Transmission fluid volume 83 l. and 19 l. 77 % more or 64 l.
      Circular gearbox fluid volume 6 l. and 2.8 l. 53 % more or 3.2 l.
      Each tandem case fluid volume 98 l. and 29 l. 70 % more or 69 l.
      Front axle maximum operating weight 8811 kg and 4250 kg 52 % more or 4561 kg
      Rear axle maximum operating weight 17729 kg and 10300 kg 42 % more or 7429 kg
      Fuel Capacity 416 l. and 340 l. 18 % more or 76 l.
      Cooling system fluid volume 48.3 l. and 40 l. 17 % more or 8.3 l.

      Motor

      Displacement 10.3 l. and 8.3 l. 19 % more or 2.0 l.

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 47.3 km/h and 28.5 km/h 40 % more or 18.8 km/h

      Front Axle

      Clearance 645 mm and 622 mm 4 % more or 23 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 20 degrees

      Sizes

      Dual axis wheelbase 1594 mm and 1656 mm
      Height to cab upper part 3340 mm and 3339 mm
      Dimensional length 8521 mm and 9342 mm
      Between tyres width 2510 mm and 2817 mm
      Wheelbase 6219 mm and 6460 mm
      Blade base 2562 mm and 2860 mm

      Operation

      Total maximum operating weight 14550 kg and 26540 kg

      Motor

      Manufacturer Cummins and Caterpillar
      Model 6 CTAA 8.3 2 level and 3176 ATAAC
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump full hydraulic system with load sensing and axial piston
      Overflow valve pressure 17900 kPa and 24150 kPa

      Gear box

      Forward gears number 8 and 8
      Transmission type Powershift transmission with direct drive and direct drive, powershift, of planetary type

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 19 degrees and 32 degrees

      Dump

      Left lateral displacement 533 mm and 650 mm
      Lateral right shift 686 mm and 790 mm
      Lowered blade pressure 9356 kg and 15657 kg
      Mouldboard width 3962 mm and 4267 mm
      Mouldboard height 671 mm and 686 mm
      Mouldboard thickness 22 mm and 25 mm

      Circle

      Blade tilt front angle 40 degrees and 40 degrees
      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1753 mm and 1822 mm

      Images

      Sizes

      8. Blade base 2562 mm 8. Blade base 2860 mm
      1. Dimensional length 8521 mm 1. Dimensional length 9342 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2817 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3339 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6460 mm
      5. Rear ground clearance 610 mm 5. Rear ground clearance 378 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1656 mm