vs.

      New Holland F170 vs. Caterpillar 16H

      8 reasons to buy New Holland F170:

      Steerage

      Turn radius 7.3 m and 8.2 m 11 % less or 0.9 m

      Sizes

      Rear ground clearance 610 mm and 409 mm 33 % more or 201 mm

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump flow rate 183 l/min and 254 l/min 28 % less or 71 l/min

      Dump

      Maximum cutting depth 712 mm and 470 mm 34 % more or 242 mm

      Circle

      Maximum radius outside left tyres 1735 mm and 2311 mm 25 % less or 576 mm
      Right maximum radius outside tyres 1895 mm and 2311 mm 18 % less or 416 mm
      Maximum lifting above ground level 444 mm and 419 mm 6 % more or 25 mm

      14 reasons to buy Caterpillar 16H:

      Operation

      Generator current strength 75 amperes and 70 amperes 7 % more or 5 amperes
      Front axle maximum operating weight 8846 kg and 4250 kg 52 % more or 4596 kg
      Rear axle maximum operating weight 22746 kg and 10300 kg 55 % more or 12446 kg
      Fuel Capacity 492 l. and 340 l. 31 % more or 152 l.
      Cooling system fluid volume 46.5 l. and 40 l. 14 % more or 6.5 l.
      Hydraulic system fluid volume 129 l. and 95 l. 26 % more or 34 l.
      Circular gearbox fluid volume 8 l. and 2.8 l. 65 % more or 5.2 l.
      Each tandem case fluid volume 121 l. and 29 l. 76 % more or 92 l.

      Motor

      Displacement 11.9 l. and 8.3 l. 30 % more or 3.6 l.
      Effective drives torque 7-8 1550 Nm and 230.5 Nm 85 % more or 1319.5 Nm

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum forward speed 48.1 km/h and 43 km/h 11 % more or 5.1 km/h
      Maximum reverse gear 45.7 km/h and 28.5 km/h 38 % more or 17.2 km/h

      Front Axle

      Clearance 732 mm and 622 mm 15 % more or 110 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 20 degrees

      Sizes

      Height to cab upper part 3340 mm and 3524 mm
      Dimensional length 8521 mm and 9994 mm
      Between tyres width 2510 mm and 3077 mm
      Wheelbase 6219 mm and 6960 mm
      Blade base 2562 mm and 3071 mm
      Dual axis wheelbase 1594 mm and 1841 mm

      Operation

      Operating voltage 24 V and 24 V
      Total maximum operating weight 14550 kg and 31592 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer Cummins and Caterpillar
      Model 6 CTAA 8.3 2 level and 3196 ETA

      Hydraulic system

      Type of pump full hydraulic system with load sensing and axial piston
      Overflow valve pressure 17900 kPa and 24150 kPa

      Gear box

      Forward gears number 8 and 8
      Transmission type Powershift transmission with direct drive and direct drive, powershift, of planetary type

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 19 degrees and 32 degrees

      Dump

      Mouldboard width 3962 mm and 4877 mm
      Mouldboard height 671 mm and 787 mm
      Mouldboard thickness 22 mm and 25 mm
      Left lateral displacement 533 mm and 650 mm
      Lateral right shift 686 mm and 790 mm
      Lowered blade pressure 9356 kg and 15831 kg

      Circle

      Blade tilt front angle 40 degrees and 40 degrees
      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1753 mm and 1822 mm

      Images

      Sizes

      1. Dimensional length 8521 mm 1. Dimensional length 9994 mm
      2. Between tyres width 2510 mm 2. Between tyres width 3077 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3524 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6960 mm
      5. Rear ground clearance 610 mm 5. Rear ground clearance 409 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1841 mm
      8. Blade base 2562 mm 8. Blade base 3071 mm