vs.

      New Holland F170 vs. Komatsu GD705A-4

      4 reasons to buy New Holland F170:

      Steerage

      Turn radius 7.3 m and 7.5 m 3 % less or 0.2 m

      Sizes

      Rear ground clearance 610 mm and 410 mm 33 % more or 200 mm

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Front Axle

      Clearance 622 mm and 410 mm 34 % more or 212 mm

      3 reasons to buy Komatsu GD705A-4:

      Operation

      Fuel Capacity 400 l. and 340 l. 15 % more or 60 l.

      Motor

      Displacement 11.1 l. and 8.3 l. 25 % more or 2.8 l.

      Gear box

      Maximum reverse gear 45.9 km/h and 28.5 km/h 38 % more or 17.4 km/h

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 26 degrees

      Sizes

      Dual axis wheelbase 1594 mm and 1730 mm
      Dimensional length 8521 mm and 9270 mm
      Between tyres width 2510 mm and 2800 mm
      Wheelbase 6219 mm and 6450 mm
      Blade base 2562 mm and 2900 mm
      Height to cab upper part 3340 mm and 3560 mm

      Operation

      Tyre size 13.00 x 24 (12PR) and 16.00-24-12PR

      Motor

      Cylinders number 6 and 6
      Manufacturer Cummins and Komatsu
      Model 6 CTAA 8.3 2 level and S6D125

      Gear box

      Forward gears number 8 and 8
      Maximum forward speed 43 km/h and 43 km/h

      Dump

      Mouldboard width 3962 mm and 4320 mm
      Mouldboard height 671 mm and 700 mm

      Images

      Sizes

      1. Dimensional length 8521 mm 1. Dimensional length 9270 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2800 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3560 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6450 mm
      5. Rear ground clearance 610 mm 5. Rear ground clearance 410 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1730 mm
      8. Blade base 2562 mm 8. Blade base 2900 mm