vs.

      New Holland F170 vs. New Holland F106.6

      17 reasons to buy New Holland F170:

      Steerage

      Turn radius 7.3 m and 7250 m 100 % less or 7242.7 m

      Sizes

      Rear ground clearance 610 mm and 307 mm 50 % more or 303 mm

      Operation

      Front axle maximum operating weight 4250 kg and 3800 kg 11 % more or 450 kg
      Rear axle maximum operating weight 10300 kg and 8200 kg 20 % more or 2100 kg
      Oil system fluid volume 19 l. and 12.5 l. 34 % more or 6.5 l.
      Fuel Capacity 340 l. and 189 l. 44 % more or 151 l.

      Motor

      Displacement 8.3 l. and 5.9 l. 29 % more or 2.4 l.
      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 43 km/h and 37.8 km/h 12 % more or 5.2 km/h
      Maximum reverse gear 28.5 km/h and 27.9 km/h 2 % more or 0.6 km/h

      Front Axle

      Clearance 622 mm and 485 mm 22 % more or 137 mm

      Dump

      Maximum cutting depth 712 mm and 450 mm 37 % more or 262 mm

      Circle

      Maximum radius outside left tyres 1735 mm and 2150 mm 19 % less or 415 mm
      Right maximum radius outside tyres 1895 mm and 2490 mm 24 % less or 595 mm
      Maximum lifting above ground level 444 mm and 400 mm 10 % more or 44 mm

      4 reasons to buy New Holland F106.6:

      Operation

      Hydraulic system fluid volume 170 l. and 95 l. 44 % more or 75 l.
      Transmission fluid volume 21 l. and 19 l. 10 % more or 2 l.
      Each tandem case fluid volume 74 l. and 29 l. 61 % more or 45 l.

      Hydraulic system

      Pump flow rate 95 l/min and 183 l/min 48 % less or 88 l/min

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 28 degrees

      Sizes

      Height to cab upper part 3340 mm and 3184 mm
      Dimensional length 8521 mm and 8888 mm
      Between tyres width 2510 mm and 2307 mm
      Wheelbase 6219 mm and 5243 mm
      Blade base 2562 mm and 1981 mm
      Dual axis wheelbase 1594 mm and 1250 mm

      Operation

      Generator current strength 70 amperes and 70 amperes
      Total maximum operating weight 14550 kg and 11500 kg
      Tyre size 13.00 x 24 (12PR) and 405/70R20
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Aspiration turbocharging and turbocharging, water cooling
      Model 6 CTAA 8.3 2 level and CNH 4-stroke cycle, naturally aspirated diesel engine

      Hydraulic system

      Overflow valve pressure 17900 kPa and 20000 kPa
      Type of pump full hydraulic system with load sensing and Axial cam pump, variable displacement piston pump

      Gear box

      Transmission type Powershift transmission with direct drive and powershift transmission

      Front Axle

      Wheel tilt 18 degrees and 22 degrees
      General fluctuations 19 degrees and 15 degrees

      Dump

      Left lateral displacement 533 mm and 700 mm
      Mouldboard width 3962 mm and 3355 mm
      Lateral right shift 686 mm and 500 mm
      Mouldboard height 671 mm and 152 mm
      Mouldboard thickness 22 mm and 19 mm

      Circle

      Rotating 360 degrees and degrees

      Images

      Sizes

      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3184 mm
      4. Wheelbase 6219 mm 4. Wheelbase 5243 mm
      5. Rear ground clearance 610 mm 5. Rear ground clearance 307 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1250 mm
      8. Blade base 2562 mm 8. Blade base 1981 mm
      1. Dimensional length 8521 mm 1. Dimensional length 8888 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2307 mm