vs.

      New Holland F200 vs. Caterpillar 160M2

      7 reasons to buy New Holland F200:

      Steerage

      Turn radius 7.3 m and 7.8 m 6 % less or 0.5 m

      Sizes

      Rear ground clearance 610 mm and 344 mm 44 % more or 266 mm

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Hydraulic system

      Pump flow rate 186 l/min and 210.1 l/min 11 % less or 24.1 l/min

      Front Axle

      Clearance 622 mm and 600 mm 4 % more or 22 mm

      Circle

      Maximum radius outside left tyres 1978 mm and 2090 mm 5 % less or 112 mm
      Right maximum radius outside tyres 2174 mm and 2278 mm 5 % less or 104 mm

      16 reasons to buy Caterpillar 160M2:

      Operation

      Generator current strength 150 amperes and 70 amperes 53 % more or 80 amperes
      Front axle maximum operating weight 6052.3 kg and 5103 kg 16 % more or 949.3 kg
      Rear axle maximum operating weight 16530.7 kg and 12147 kg 27 % more or 4383.7 kg
      Oil system fluid volume 29.9 l. and 19 l. 36 % more or 10.9 l.
      Fuel Capacity 416.4 l. and 341 l. 18 % more or 75.4 l.
      Cooling system fluid volume 56 l. and 40 l. 29 % more or 16 l.
      Hydraulic system fluid volume 99.9 l. and 95.6 l. 4 % more or 4.3 l.
      Transmission fluid volume 65.1 l. and 22 l. 66 % more or 43.1 l.
      Circular gearbox fluid volume 6.8 l. and 3 l. 56 % more or 3.8 l.
      Each tandem case fluid volume 64 l. and 23 l. 64 % more or 41 l.

      Motor

      Effective drives torque 7-8 1355.8 Nm and 271.2 Nm 80 % more or 1084.6 Nm

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 46.7 km/h and 43 km/h 8 % more or 3.7 km/h
      Maximum reverse gear 36.9 km/h and 30.6 km/h 17 % more or 6.3 km/h

      Dump

      Maximum cutting depth 750 mm and 712 mm 5 % more or 38 mm

      Circle

      Maximum lifting above ground level 452 mm and 445 mm 2 % more or 7 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 20 degrees

      Sizes

      Dual axis wheelbase 1602 mm and 1523 mm
      Height to cab upper part 3340 mm and 3287 mm
      Dimensional length 8555 mm and 8898 mm
      Between tyres width 2650 mm and 2581 mm
      Wheelbase 6219 mm and 6126 mm
      Blade base 2562 mm and 2557 mm

      Operation

      Total maximum operating weight 17250 kg and 23947.4 kg
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Manufacturer Cummins and Caterpillar
      Model 6 CTAA 8.3 2 level and C9.3 ACERT VHP

      Hydraulic system

      Type of pump full hydraulic system with load sensing and variable displacement piston pump
      Overflow valve pressure 17900 kPa and 24152.3 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 19 degrees and 32 degrees

      Dump

      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 533 mm and 510 mm
      Lateral right shift 686 mm and 660 mm
      Lowered blade pressure 10885 kg and 10380 kg
      Mouldboard width 4267 mm and 4267.2 mm
      Mouldboard height 671 mm and 609.6 mm

      Circle

      Blade tilt front angle 40 degrees and 40 degrees
      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1753 mm and 1530 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3287 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6126 mm
      5. Rear ground clearance 610 mm 5. Rear ground clearance 344 mm
      7. Dual axis wheelbase 1602 mm 7. Dual axis wheelbase 1523 mm
      8. Blade base 2562 mm 8. Blade base 2557 mm
      1. Dimensional length 8555 mm 1. Dimensional length 8898 mm
      2. Between tyres width 2650 mm 2. Between tyres width 2581 mm