vs.

      New Holland F200 vs. Caterpillar NO.14E

      9 reasons to buy New Holland F200:

      Steerage

      Turn radius 7.3 m and 11.6 m 37 % less or 4.3 m

      Operation

      Fuel Capacity 341 l. and 285 l. 16 % more or 56 l.
      Hydraulic system fluid volume 95.6 l. and 32 l. 67 % more or 63.6 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Maximum forward speed 43 km/h and 39.1 km/h 9 % more or 3.9 km/h

      Front Axle

      Clearance 622 mm and 580 mm 7 % more or 42 mm

      Circle

      Right maximum radius outside tyres 2174 mm and 2440 mm 11 % less or 266 mm
      Maximum radius outside left tyres 1978 mm and 2440 mm 19 % less or 462 mm

      10 reasons to buy Caterpillar NO.14E:

      Operation

      Cooling system fluid volume 47 l. and 40 l. 15 % more or 7 l.
      Transmission fluid volume 76 l. and 22 l. 71 % more or 54 l.
      Rear differential/final drive fluid volume 35 l. and 25 l. 29 % more or 10 l.
      Each tandem case fluid volume 47 l. and 23 l. 51 % more or 24 l.

      Motor

      Displacement 10.5 l. and 8.3 l. 21 % more or 2.2 l.

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum reverse gear 47.3 km/h and 30.6 km/h 35 % more or 16.7 km/h

      Circle

      Blade tilt front angle 90 degrees and 40 degrees 56 % more or 50 degrees
      Blade tilt rear angle 90 degrees and 5 degrees 94 % more or 85 degrees
      Maximum lifting above ground level 460 mm and 445 mm 3 % more or 15 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 3340 mm and 3250 mm
      Dimensional length 8555 mm and 8300 mm
      Between tyres width 2650 mm and 2440 mm
      Wheelbase 6219 mm and 6100 mm
      Blade base 2562 mm and 2750 mm
      Dual axis wheelbase 1602 mm and 1520 mm

      Operation

      Tyre size 14.00 x 24 (10PR) and 14-24 10PR
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Manufacturer Cummins and Caterpillar

      Hydraulic system

      Type of pump full hydraulic system with load sensing and Hermetic

      Gear box

      Transmission type Powershift transmission with direct drive and powershift transmission

      Front Axle

      Wheel tilt 18 degrees and 22 degrees
      General fluctuations 19 degrees and 31 degrees

      Circle

      Diameter 1753 mm and 1650 mm
      Rotating 360 degrees and 180 degrees

      Images

      Sizes

      7. Dual axis wheelbase 1602 mm 7. Dual axis wheelbase 1520 mm
      8. Blade base 2562 mm 8. Blade base 2750 mm
      1. Dimensional length 8555 mm 1. Dimensional length 8300 mm
      2. Between tyres width 2650 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3250 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6100 mm