vs.

      New Holland F200 vs. John Deere 770CH

      9 reasons to buy New Holland F200:

      Operation

      Front axle maximum operating weight 5103 kg and 4495.1 kg 12 % more or 607.9 kg
      Rear axle maximum operating weight 12147 kg and 11938.6 kg 2 % more or 208.4 kg
      Hydraulic system fluid volume 95.6 l. and 59 l. 38 % more or 36.6 l.
      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes

      Motor

      Displacement 8.3 l. and 8.1 l. 2 % more or 0.2 l.
      Power measured at 2200 rev / min and 1900 rev / min 14 % more or 300 rev

      Hydraulic system

      Pump flow rate 186 l/min and 207.1 l/min 10 % less or 21.1 l/min

      Gear box

      Maximum forward speed 43 km/h and 41.5 km/h 3 % more or 1.5 km/h

      Circle

      Maximum radius outside left tyres 1978 mm and 2160 mm 8 % less or 182 mm

      15 reasons to buy John Deere 770CH:

      Steerage

      Turn radius 6.7 m and 7.3 m 8 % less or 0.6 m

      Operation

      Fuel Capacity 401.3 l. and 341 l. 15 % more or 60.3 l.
      Oil system fluid volume 29 l. and 19 l. 34 % more or 10 l.
      Cooling system fluid volume 45.4 l. and 40 l. 12 % more or 5.4 l.
      Circular gearbox fluid volume 3.8 l. and 3 l. 21 % more or 0.8 l.
      Transmission fluid volume 38 l. and 22 l. 42 % more or 16 l.
      Each tandem case fluid volume 75 l. and 23 l. 69 % more or 52 l.
      Rear differential/final drive fluid volume 36 l. and 25 l. 31 % more or 11 l.

      Motor

      Effective drives torque 7-8 924.7 Nm and 271.2 Nm 71 % more or 653.5 Nm

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 41.5 km/h and 30.6 km/h 26 % more or 10.9 km/h

      Front Axle

      Clearance 638 mm and 622 mm 3 % more or 16 mm

      Circle

      Right maximum radius outside tyres 2110 mm and 2174 mm 3 % less or 64 mm
      Maximum lifting above ground level 470 mm and 445 mm 5 % more or 25 mm
      Blade tilt front angle 49 degrees and 40 degrees 18 % more or 9 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 3340 mm and 3120 mm
      Dimensional length 8555 mm and 8610 mm
      Between tyres width 2650 mm and 2510 mm
      Wheelbase 6219 mm and 5970 mm
      Blade base 2562 mm and 2670 mm
      Dual axis wheelbase 1602 mm and 1540 mm

      Operation

      Total maximum operating weight 17250 kg and 16433.7 kg
      Tyre size 14.00 x 24 (10PR) and 14.00-24
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Cylinders number 6 and 6
      Manufacturer Cummins and John Deere
      Model 6 CTAA 8.3 2 level and 6081H

      Hydraulic system

      Type of pump full hydraulic system with load sensing and variable displacement with locking in the middle position
      Overflow valve pressure 17900 kPa and 17581.6 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 19 degrees and 32 degrees

      Dump

      Mouldboard width 4267 mm and 3657.6 mm
      Mouldboard height 671 mm and 609.6 mm
      Mouldboard thickness 22 mm and 22.4 mm
      Left lateral displacement 533 mm and 683 mm
      Lateral right shift 686 mm and 683 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1753 mm and 1520 mm

      Images

      Sizes

      8. Blade base 2562 mm 8. Blade base 2670 mm
      1. Dimensional length 8555 mm 1. Dimensional length 8610 mm
      2. Between tyres width 2650 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3120 mm
      4. Wheelbase 6219 mm 4. Wheelbase 5970 mm
      7. Dual axis wheelbase 1602 mm 7. Dual axis wheelbase 1540 mm