vs.

      New Holland F200 vs. Volvo G66

      6 reasons to buy New Holland F200:

      Operation

      Cooling system fluid volume 40 l. and 17 l. 57 % more or 23 l.
      Rear differential/final drive fluid volume 25 l. and 17 l. 32 % more or 8 l.
      Fuel Capacity 341 l. and 148 l. 57 % more or 193 l.

      Motor

      Displacement 8.3 l. and 3.9 l. 53 % more or 4.4 l.

      Gear box

      Maximum forward speed 43 km/h and 16.1 km/h 63 % more or 26.9 km/h

      Dump

      Maximum cutting depth 712 mm and 254 mm 64 % more or 458 mm

      5 reasons to buy Volvo G66:

      Steerage

      Turn radius 5 m and 7.3 m 32 % less or 2.3 m

      Operation

      Hydraulic system fluid volume 114 l. and 95.6 l. 16 % more or 18.4 l.

      Motor

      Power measured at 2500 rev / min and 2200 rev / min 12 % more or 300 rev

      Hydraulic system

      Pump flow rate 61 l/min and 186 l/min 67 % less or 125 l/min

      Gear box

      Maximum reverse gear 32.2 km/h and 30.6 km/h 5 % more or 1.6 km/h

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 37 degrees

      Sizes

      Dimensional length 8555 mm and 6350 mm
      Height to cab upper part 3340 mm and 2896 mm
      Between tyres width 2650 mm and 2184 mm
      Wheelbase 6219 mm and 4674 mm
      Blade base 2562 mm and 1880 mm

      Motor

      Manufacturer Cummins and Cummins
      Model 6 CTAA 8.3 2 level and 4B3.9

      Hydraulic system

      Overflow valve pressure 17900 kPa and 12410.6 kPa
      Type of pump full hydraulic system with load sensing and single stream

      Gear box

      Transmission type Powershift transmission with direct drive and hydrostatic

      Dump

      Mouldboard width 4267 mm and 3048 mm
      Mouldboard height 671 mm and 482.6 mm
      Mouldboard thickness 22 mm and 15.9 mm
      Left lateral displacement 533 mm and 1168.4 mm
      Lateral right shift 686 mm and 1168.4 mm

      Images

      Sizes

      1. Dimensional length 8555 mm 1. Dimensional length 6350 mm
      2. Between tyres width 2650 mm 2. Between tyres width 2184 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 2896 mm
      4. Wheelbase 6219 mm 4. Wheelbase 4674 mm
      8. Blade base 2562 mm 8. Blade base 1880 mm