vs.

      New Holland F200 vs. Volvo G720

      8 reasons to buy New Holland F200:

      Steerage

      Turn radius 7.3 m and 7.8 m 6 % less or 0.5 m

      Operation

      Hydraulic system fluid volume 95.6 l. and 90 l. 6 % more or 5.6 l.
      Rear differential/final drive fluid volume 25 l. and 23 l. 8 % more or 2 l.

      Hydraulic system

      Pump flow rate 186 l/min and 191 l/min 3 % less or 5 l/min

      Front Axle

      Clearance 622 mm and 609.6 mm 2 % more or 12.4 mm

      Dump

      Maximum cutting depth 712 mm and 444.5 mm 38 % more or 267.5 mm

      Circle

      Right maximum radius outside tyres 2174 mm and 3035.3 mm 28 % less or 861.3 mm
      Maximum radius outside left tyres 1978 mm and 3048 mm 35 % less or 1070 mm

      9 reasons to buy Volvo G720:

      Operation

      Fuel Capacity 387.5 l. and 341 l. 12 % more or 46.5 l.
      Cooling system fluid volume 47 l. and 40 l. 15 % more or 7 l.
      Transmission fluid volume 38 l. and 22 l. 42 % more or 16 l.
      Each tandem case fluid volume 100 l. and 23 l. 77 % more or 77 l.

      Motor

      Effective drives torque 7-8 759.3 Nm and 271.2 Nm 64 % more or 488.1 Nm

      Gear box

      Maximum reverse gear 32.7 km/h and 30.6 km/h 6 % more or 2.1 km/h
      Maximum forward speed 45.7 km/h and 43 km/h 6 % more or 2.7 km/h

      Circle

      Blade tilt front angle 45 degrees and 40 degrees 11 % more or 5 degrees
      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 72 degrees

      Sizes

      Height to cab upper part 3340 mm and 3099 mm
      Dimensional length 8555 mm and 8484 mm
      Between tyres width 2650 mm and 2540 mm
      Wheelbase 6219 mm and 6096 mm
      Blade base 2562 mm and 2591 mm

      Operation

      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Displacement 8.3 l. and 8.3 l.
      Aspiration turbocharging and turbocharging
      Manufacturer Cummins and Cummins
      Model 6 CTAA 8.3 2 level and 6C8.3

      Hydraulic system

      Overflow valve pressure 17900 kPa and 17236.9 kPa
      Type of pump full hydraulic system with load sensing and hydraulic system with load sensing

      Gear box

      Transmission type Powershift transmission with direct drive and Volvo 8400
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 19 degrees and 16 degrees

      Dump

      Mouldboard height 671 mm and 635 mm
      Mouldboard thickness 22 mm and 22.2 mm
      Left lateral displacement 533 mm and 673.1 mm
      Lateral right shift 686 mm and 673.1 mm
      Mouldboard width 4267 mm and 3657.6 mm
      Lowered blade pressure 10885 kg and 7582.7 kg

      Circle

      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      8. Blade base 2562 mm 8. Blade base 2591 mm
      1. Dimensional length 8555 mm 1. Dimensional length 8484 mm
      2. Between tyres width 2650 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3099 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6096 mm