vs.

      New Holland F200 vs. Volvo G960

      8 reasons to buy New Holland F200:

      Steerage

      Turn radius 7.3 m and 7265 m 100 % less or 7257.7 m

      Operation

      Cooling system fluid volume 40 l. and 34 l. 15 % more or 6 l.
      Hydraulic system fluid volume 95.6 l. and 91 l. 5 % more or 4.6 l.

      Motor

      Displacement 8.3 l. and 7.2 l. 13 % more or 1.1 l.
      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev

      Hydraulic system

      Pump flow rate 186 l/min and 208 l/min 11 % less or 22 l/min

      Front Axle

      Clearance 622 mm and 610 mm 2 % more or 12 mm

      Circle

      Maximum radius outside left tyres 1978 mm and 2020 mm 2 % less or 42 mm

      14 reasons to buy Volvo G960:

      Operation

      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes
      Transmission fluid volume 61 l. and 22 l. 64 % more or 39 l.
      Each tandem case fluid volume 100 l. and 23 l. 77 % more or 77 l.
      Front axle maximum operating weight 7570 kg and 5103 kg 33 % more or 2467 kg
      Rear axle maximum operating weight 14290 kg and 12147 kg 15 % more or 2143 kg
      Fuel Capacity 404 l. and 341 l. 16 % more or 63 l.
      Oil system fluid volume 21.5 l. and 19 l. 12 % more or 2.5 l.

      Motor

      Effective drives torque 7-8 1073 Nm and 271.2 Nm 75 % more or 801.8 Nm

      Gear box

      Maximum forward speed 45.4 km/h and 43 km/h 5 % more or 2.4 km/h
      Maximum reverse gear 32 km/h and 30.6 km/h 4 % more or 1.4 km/h

      Dump

      Maximum cutting depth 790 mm and 712 mm 10 % more or 78 mm

      Circle

      Blade tilt rear angle 6 degrees and 5 degrees 17 % more or 1 degrees
      Right maximum radius outside tyres 2010 mm and 2174 mm 8 % less or 164 mm
      Blade tilt front angle 45 degrees and 40 degrees 11 % more or 5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 23 degrees

      Sizes

      Height to cab upper part 3340 mm and 3225 mm
      Dimensional length 8555 mm and 9150 mm
      Between tyres width 2650 mm and 2537 mm
      Wheelbase 6219 mm and 6280 mm
      Blade base 2562 mm and 2650 mm
      Rear ground clearance 610 mm and 610 mm

      Operation

      Tyre size 14.00 x 24 (10PR) and 14:00 x 24, G-2
      Operating voltage 24 V and 24 V
      Total maximum operating weight 17250 kg and 21860 kg

      Motor

      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Cummins and Volvo
      Model 6 CTAA 8.3 2 level and D7E
      Cylinders number 6 and 6

      Hydraulic system

      Overflow valve pressure 17900 kPa and 20684.3 kPa
      Type of pump full hydraulic system with load sensing and axial piston pump

      Gear box

      Transmission type Powershift transmission with direct drive and HTE 840, Sequential direct drive gearbox with shifting under load Volvo
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 19 degrees and 16 degrees

      Dump

      Mouldboard width 4267 mm and 3657.6 mm
      Mouldboard height 671 mm and 635 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 533 mm and 673 mm
      Lateral right shift 686 mm and 673 mm
      Lowered blade pressure 10885 kg and 8823 kg

      Circle

      Diameter 1753 mm and 1626 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8555 mm 1. Dimensional length 9150 mm
      2. Between tyres width 2650 mm 2. Between tyres width 2537 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3225 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6280 mm
      5. Rear ground clearance 610 mm 5. Rear ground clearance 610 mm
      8. Blade base 2562 mm 8. Blade base 2650 mm