vs.

      New Holland G140 vs. Komatsu GD825A-2

      7 reasons to buy New Holland G140:

      Operation

      Hydraulic system fluid volume 179.8 l. and 80 l. 56 % more or 99.8 l.
      Generator current strength 80 amperes and 50 amperes 37 % more or 30 amperes

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev
      Displacement 6.7 l. and 5.9 l. 12 % more or 0.8 l.

      Circle

      Maximum radius outside left tyres 1978 mm and 2400 mm 18 % less or 422 mm
      Right maximum radius outside tyres 2174 mm and 2400 mm 9 % less or 226 mm
      Blade tilt rear angle 42 degrees and 5 degrees 88 % more or 37 degrees

      13 reasons to buy Komatsu GD825A-2:

      Steerage

      Turn radius 7.9 m and 7250 m 100 % less or 7242.1 m

      Operation

      Transmission fluid volume 25 l. and 17.8 l. 29 % more or 7.2 l.
      Each tandem case fluid volume 190 l. and 29.1 l. 85 % more or 160.9 l.
      Fuel Capacity 500 l. and 340.7 l. 32 % more or 159.3 l.
      Cooling system fluid volume 58 l. and 39.7 l. 32 % more or 18.3 l.

      Motor

      Effective speeds output 7-8 208.8 kW and 119.3 kW 43 % more or 89.5 kW
      Maximum power 208.8 kW and 119.3 kW 43 % more or 89.5 kW

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum forward speed 44.9 km/h and 42.8 km/h 5 % more or 2.1 km/h
      Maximum reverse gear 47.9 km/h and 28.5 km/h 41 % more or 19.4 km/h

      Front Axle

      Clearance 680 mm and 622 mm 9 % more or 58 mm

      Circle

      Maximum lifting above ground level 490 mm and 445 mm 9 % more or 45 mm
      Blade tilt front angle 49 degrees and 5 degrees 90 % more or 44 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Dimensional length 8521 mm and 10010 mm
      Height to cab upper part 3140 mm and 3550 mm
      Between tyres width 2510 mm and 3310 mm
      Wheelbase 6219 mm and 7132.3 mm
      Blade base 2562 mm and 3100 mm
      Dual axis wheelbase 1594 mm and 1840 mm

      Operation

      Tyre size 14.00X24 10 layers G2 and 23.5 X 25-12PR (L3) tires
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Cummins and Komatsu
      Model QSB 6.7L and S6D140E
      Cylinders number 6 and 6

      Hydraulic system

      Overflow valve pressure 17926.4 kPa and 24545.3 kPa
      Type of pump variable displacement piston pump and Double-acting hydraulic cylinders of piston-type

      Gear box

      Transmission type Powershift transmission with direct drive and komatsu Hydro-Static Transmission
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 17.5 degrees and 14.5 degrees
      General fluctuations 19 degrees and 32 degrees

      Dump

      Mouldboard width 3657.6 mm and 4928 mm
      Mouldboard height 622 mm and 800 mm
      Mouldboard thickness 22 mm and 25 mm

      Circle

      Diameter 1753 mm and 1775 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8521 mm 1. Dimensional length 10010 mm
      2. Between tyres width 2510 mm 2. Between tyres width 3310 mm
      3. Height to cab upper part 3140 mm 3. Height to cab upper part 3550 mm
      4. Wheelbase 6219 mm 4. Wheelbase 7132.3 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1840 mm
      8. Blade base 2562 mm 8. Blade base 3100 mm