vs.

      New Holland G140 vs. Volvo G730 VHP

      7 reasons to buy New Holland G140:

      Operation

      Hydraulic system fluid volume 179.8 l. and 90 l. 50 % more or 89.8 l.
      Generator current strength 80 amperes and 75 amperes 6 % more or 5 amperes

      Hydraulic system

      Pump flow rate 185.5 l/min and 191 l/min 3 % less or 5.5 l/min

      Front Axle

      Clearance 622 mm and 610 mm 2 % more or 12 mm

      Circle

      Maximum radius outside left tyres 1978 mm and 2019.3 mm 2 % less or 41.3 mm
      Maximum lifting above ground level 445 mm and 444.5 mm 0 % more or 0.5 mm
      Blade tilt rear angle 42 degrees and 6.5 degrees 85 % more or 35.5 degrees

      14 reasons to buy Volvo G730 VHP:

      Operation

      Fuel Capacity 378.5 l. and 340.7 l. 10 % more or 37.8 l.
      Cooling system fluid volume 47 l. and 39.7 l. 16 % more or 7.3 l.
      Transmission fluid volume 38 l. and 17.8 l. 53 % more or 20.2 l.
      Each tandem case fluid volume 100 l. and 29.1 l. 71 % more or 70.9 l.
      Front axle standard operating weight 4806 kg and 3706.8 kg 23 % more or 1099.2 kg
      Rear axle standard operating weight 10957 kg and 9863.8 kg 10 % more or 1093.2 kg

      Motor

      Effective speeds output 7-8 160.3 kW and 119.3 kW 26 % more or 41.0 kW
      Maximum power 160.3 kW and 119.3 kW 26 % more or 41.0 kW
      Effective drives torque 7-8 964 Nm and 746 Nm 23 % more or 218 Nm
      Displacement 8.3 l. and 6.7 l. 19 % more or 1.6 l.

      Gear box

      Maximum forward speed 45.9 km/h and 42.8 km/h 7 % more or 3.1 km/h
      Maximum reverse gear 32.8 km/h and 28.5 km/h 13 % more or 4.3 km/h

      Circle

      Right maximum radius outside tyres 2006.6 mm and 2174 mm 8 % less or 167.4 mm
      Blade tilt front angle 44 degrees and 5 degrees 89 % more or 39 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Wheelbase 6219 mm and 6096 mm
      Blade base 2562 mm and 2591 mm
      Height to cab upper part 3140 mm and 3099 mm
      Dimensional length 8521 mm and 8484 mm
      Between tyres width 2510 mm and 2540 mm

      Operation

      Tyre size 14.00X24 10 layers G2 and 14.00 x 24, G-2
      Operating voltage 24 V and 24 V
      Overall standard operating weight 13570.6 kg and 15763 kg

      Motor

      Manufacturer Cummins and Cummins
      Model QSB 6.7L and 6C8.3
      Aspiration turbocharging and turbocharging

      Hydraulic system

      Type of pump variable displacement piston pump and hydraulic system with load sensing
      Overflow valve pressure 17926.4 kPa and 17236.9 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and powershift transmission
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 17.5 degrees and 18 degrees
      General fluctuations 19 degrees and 16 degrees

      Dump

      Left lateral displacement 533 mm and 673.1 mm
      Lateral right shift 711 mm and 673.1 mm
      Lowered blade pressure 6707.7 kg and 8357.9 kg
      Mouldboard width 3657.6 mm and 3657.6 mm
      Mouldboard height 622 mm and 635 mm
      Mouldboard thickness 22 mm and 22.2 mm

      Circle

      Diameter 1753 mm and 1683 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8521 mm 1. Dimensional length 8484 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3140 mm 3. Height to cab upper part 3099 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6096 mm
      8. Blade base 2562 mm 8. Blade base 2591 mm