vs.

      New Holland G140 vs. Volvo G960

      9 reasons to buy New Holland G140:

      Steerage

      Turn radius 7250 m and 7265 m 0 % less or 15 m

      Sizes

      Rear ground clearance 622 mm and 610 mm 2 % more or 12 mm

      Operation

      Cooling system fluid volume 39.7 l. and 34 l. 14 % more or 5.7 l.
      Hydraulic system fluid volume 179.8 l. and 91 l. 49 % more or 88.8 l.

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev

      Hydraulic system

      Pump flow rate 185.5 l/min and 208 l/min 11 % less or 22.5 l/min

      Front Axle

      Clearance 622 mm and 610 mm 2 % more or 12 mm

      Circle

      Blade tilt rear angle 42 degrees and 6 degrees 86 % more or 36 degrees
      Maximum radius outside left tyres 1978 mm and 2020 mm 2 % less or 42 mm

      13 reasons to buy Volvo G960:

      Operation

      Transmission fluid volume 61 l. and 17.8 l. 71 % more or 43.2 l.
      Each tandem case fluid volume 100 l. and 29.1 l. 71 % more or 70.9 l.
      Front axle standard operating weight 5100 kg and 3706.8 kg 27 % more or 1393.2 kg
      Rear axle standard operating weight 12450 kg and 9863.8 kg 21 % more or 2586.2 kg
      Fuel Capacity 404 l. and 340.7 l. 16 % more or 63.3 l.

      Motor

      Maximum power 180.5 kW and 119.3 kW 34 % more or 61.2 kW
      Effective drives torque 7-8 1073 Nm and 746 Nm 30 % more or 327 Nm
      Displacement 7.2 l. and 6.7 l. 7 % more or 0.5 l.
      Effective speeds output 7-8 180.5 kW and 119.3 kW 34 % more or 61.2 kW

      Gear box

      Maximum forward speed 45.4 km/h and 42.8 km/h 6 % more or 2.6 km/h
      Maximum reverse gear 32 km/h and 28.5 km/h 11 % more or 3.5 km/h

      Circle

      Blade tilt front angle 45 degrees and 5 degrees 89 % more or 40 degrees
      Right maximum radius outside tyres 2010 mm and 2174 mm 8 % less or 164 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 23 degrees

      Sizes

      Height to cab upper part 3140 mm and 3225 mm
      Dimensional length 8521 mm and 9150 mm
      Between tyres width 2510 mm and 2537 mm
      Wheelbase 6219 mm and 6280 mm
      Blade base 2562 mm and 2650 mm

      Operation

      Tyre size 14.00X24 10 layers G2 and 14:00 x 24, G-2
      Operating voltage 24 V and 24 V
      Generator current strength 80 amperes and 80 amperes
      Overall standard operating weight 13570.6 kg and 17550 kg

      Motor

      Manufacturer Cummins and Volvo
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Model QSB 6.7L and D7E
      Torque measured at 1500 rev / min and 1500 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Overflow valve pressure 17926.4 kPa and 20684.3 kPa
      Type of pump variable displacement piston pump and axial piston pump

      Gear box

      Transmission type Powershift transmission with direct drive and HTE 840, Sequential direct drive gearbox with shifting under load Volvo
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      General fluctuations 19 degrees and 16 degrees
      Wheel tilt 17.5 degrees and 18 degrees

      Dump

      Mouldboard width 3657.6 mm and 3657.6 mm
      Mouldboard height 622 mm and 635 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 533 mm and 673 mm
      Lateral right shift 711 mm and 673 mm
      Lowered blade pressure 6707.7 kg and 8823 kg

      Circle

      Diameter 1753 mm and 1626 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8521 mm 1. Dimensional length 9150 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2537 mm
      3. Height to cab upper part 3140 mm 3. Height to cab upper part 3225 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6280 mm
      5. Rear ground clearance 622 mm 5. Rear ground clearance 610 mm
      8. Blade base 2562 mm 8. Blade base 2650 mm