vs.

      New Holland G140 vs. Volvo G970

      6 reasons to buy New Holland G140:

      Steerage

      Turn radius 7250 m and 7700 m 6 % less or 450 m

      Operation

      Hydraulic system fluid volume 179.8 l. and 91 l. 49 % more or 88.8 l.

      Motor

      Power measured at 2200 rev / min and 1700 rev / min 23 % more or 500 rev

      Hydraulic system

      Pump flow rate 185.5 l/min and 208 l/min 11 % less or 22.5 l/min

      Front Axle

      Clearance 622 mm and 590 mm 5 % more or 32 mm

      Circle

      Blade tilt rear angle 42 degrees and 6 degrees 86 % more or 36 degrees

      16 reasons to buy Volvo G970:

      Operation

      Each tandem case fluid volume 100 l. and 29.1 l. 71 % more or 70.9 l.
      Transmission fluid volume 61 l. and 17.8 l. 71 % more or 43.2 l.
      Front axle standard operating weight 5300 kg and 3706.8 kg 30 % more or 1593.2 kg
      Rear axle standard operating weight 13600 kg and 9863.8 kg 27 % more or 3736.2 kg
      Fuel Capacity 498 l. and 340.7 l. 32 % more or 157.3 l.
      Cooling system fluid volume 47 l. and 39.7 l. 16 % more or 7.3 l.

      Motor

      Torque measured at 1550 rev / min and 1500 rev / min 3 % more or 50 rev
      Effective speeds output 7-8 195.4 kW and 119.3 kW 39 % more or 76.1 kW
      Maximum power 195.4 kW and 119.3 kW 39 % more or 76.1 kW
      Effective drives torque 7-8 1188 Nm and 746 Nm 37 % more or 442 Nm
      Displacement 9.4 l. and 6.7 l. 29 % more or 2.7 l.

      Gear box

      Maximum forward speed 43.8 km/h and 42.8 km/h 2 % more or 1.0 km/h
      Maximum reverse gear 30.1 km/h and 28.5 km/h 5 % more or 1.6 km/h

      Circle

      Maximum radius outside left tyres 1970 mm and 1978 mm 0 % less or 8 mm
      Right maximum radius outside tyres 1960 mm and 2174 mm 10 % less or 214 mm
      Blade tilt front angle 45 degrees and 5 degrees 89 % more or 40 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 21 degrees

      Sizes

      Height to cab upper part 3140 mm and 3225 mm
      Dimensional length 8521 mm and 9500 mm
      Between tyres width 2510 mm and 2780 mm
      Wheelbase 6219 mm and 6531 mm
      Blade base 2562 mm and 2790 mm

      Operation

      Tyre size 14.00X24 10 layers G2 and 14:00 x 24, G-2
      Operating voltage 24 V and 24 V
      Generator current strength 80 amperes and 80 amperes
      Overall standard operating weight 13570.6 kg and 18900 kg

      Motor

      Cylinders number 6 and 6
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Cummins and Volvo
      Model QSB 6.7L and D9B

      Hydraulic system

      Overflow valve pressure 17926.4 kPa and 20684.3 kPa
      Type of pump variable displacement piston pump and axial piston pump

      Gear box

      Transmission type Powershift transmission with direct drive and HTE 840, Sequential direct drive gearbox with shifting under load Volvo
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 17.5 degrees and 18 degrees
      General fluctuations 19 degrees and 16 degrees

      Dump

      Mouldboard width 3657.6 mm and 3657.6 mm
      Mouldboard height 622 mm and 737 mm
      Mouldboard thickness 22 mm and 25 mm
      Left lateral displacement 533 mm and 673 mm
      Lateral right shift 711 mm and 673 mm
      Lowered blade pressure 6707.7 kg and 9253 kg

      Circle

      Diameter 1753 mm and 1626 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      3. Height to cab upper part 3140 mm 3. Height to cab upper part 3225 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6531 mm
      8. Blade base 2562 mm 8. Blade base 2790 mm
      1. Dimensional length 8521 mm 1. Dimensional length 9500 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2780 mm