vs.

      New Holland G170 vs. New Holland F156.6A

      16 reasons to buy New Holland G170:

      Steerage

      Turn radius 7.3 m and 8250 m 100 % less or 8242.7 m

      Sizes

      Rear ground clearance 378 mm and 328 mm 13 % more or 50 mm
      Front part clearance 622 mm and 141 mm 77 % more or 481 mm

      Operation

      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes
      Fuel Capacity 340.7 l. and 275 l. 19 % more or 65.7 l.
      Front axle standard operating weight 4250.2 kg and 456 kg 89 % more or 3794.2 kg
      Rear axle standard operating weight 10169.1 kg and 10141 kg 0 % more or 28.1 kg

      Motor

      Maximum power 152.9 kW and 130.5 kW 15 % more or 22.4 kW
      Displacement 6.7 l. and 5.9 l. 12 % more or 0.8 l.
      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 42.8 km/h and 37.4 km/h 13 % more or 5.4 km/h
      Maximum reverse gear 28.5 km/h and 27.1 km/h 5 % more or 1.4 km/h

      Circle

      Maximum radius outside left tyres 1978 mm and 2520 mm 22 % less or 542 mm
      Right maximum radius outside tyres 2174 mm and 3210 mm 32 % less or 1036 mm

      6 reasons to buy New Holland F156.6A:

      Operation

      Hydraulic system fluid volume 200 l. and 179.8 l. 10 % more or 20.2 l.
      Transmission fluid volume 21 l. and 18.9 l. 10 % more or 2.1 l.
      Each tandem case fluid volume 68 l. and 29.1 l. 57 % more or 38.9 l.

      Hydraulic system

      Pump flow rate 126 l/min and 185.5 l/min 32 % less or 59.5 l/min

      Front Axle

      Clearance 646 mm and 622 mm 4 % more or 24 mm

      Circle

      Maximum lifting above ground level 480 mm and 445 mm 7 % more or 35 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 28 degrees

      Sizes

      Dual axis wheelbase 1594 mm and 1544 mm
      Wheelbase 6219 mm and 5983 mm
      Blade base 2562 mm and 2504 mm
      Height to cab upper part 3140 mm and 3373 mm
      Dimensional length 8521 mm and 9975 mm
      Between tyres width 2510 mm and 2595 mm

      Operation

      Overall standard operating weight 14549.9 kg and 14736 kg
      Tyre size 14.00x24 10 layers G2 and 17.5R25EM
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and turbocharging water cooling
      Model QSB 6.7L and CNH 4-stroke cycle, naturally aspirated diesel engine
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and Axial cam pump, variable displacement piston pump
      Overflow valve pressure 17926.4 kPa and 20000 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and powershift transmission

      Front Axle

      Wheel tilt 17.5 degrees and 21 degrees
      General fluctuations 19 degrees and 15 degrees

      Dump

      Mouldboard thickness 22 mm and 19 mm
      Mouldboard width 4267.2 mm and 3660 mm
      Mouldboard height 622 mm and 152 mm
      Left lateral displacement 533 mm and 645 mm
      Lateral right shift 711 mm and 755 mm

      Circle

      Rotating 360 degrees and degrees

      Images

      Sizes

      1. Dimensional length 8521 mm 1. Dimensional length 9975 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2595 mm
      3. Height to cab upper part 3140 mm 3. Height to cab upper part 3373 mm
      4. Wheelbase 6219 mm 4. Wheelbase 5983 mm
      5. Rear ground clearance 378 mm 5. Rear ground clearance 328 mm
      6. Front part clearance 622 mm 6. Front part clearance 141 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1544 mm
      8. Blade base 2562 mm 8. Blade base 2504 mm