vs.

      New Holland RG140.B vs. Caterpillar 24M

      8 reasons to buy New Holland RG140.B:

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump flow rate 191.2 l/min and 550 l/min 65 % less or 358.8 l/min

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1

      Dump

      Maximum cutting depth 711 mm and 657 mm 8 % more or 54 mm

      Circle

      Maximum radius outside left tyres 1978 mm and 3222 mm 39 % less or 1244 mm
      Right maximum radius outside tyres 2174 mm and 3228 mm 33 % less or 1054 mm
      Blade tilt front angle 42 degrees and 40 degrees 5 % more or 2 degrees

      21 reasons to buy Caterpillar 24M:

      Steerage

      Turn radius 12.4 m and 7250 m 100 % less or 7237.6 m

      Sizes

      Rear ground clearance 507 mm and 378 mm 25 % more or 129 mm

      Operation

      Rear axle standard operating weight 43695 kg and 9707 kg 78 % more or 33988 kg
      Cooling system fluid volume 90 l. and 40 l. 56 % more or 50 l.
      Hydraulic system fluid volume 264 l. and 180 l. 32 % more or 84 l.
      Front axle maximum operating weight 19927 kg and 3700 kg 81 % more or 16227 kg
      Rear axle maximum operating weight 46211 kg and 9807 kg 79 % more or 36404 kg
      Rear differential/final drive fluid volume 184 l. and 29 l. 84 % more or 155 l.
      Circular gearbox fluid volume 8.5 l. and 2.8 l. 67 % more or 5.7 l.
      Fuel Capacity 1326 l. and 341 l. 74 % more or 985 l.
      Each tandem case fluid volume 322 l. and 29 l. 91 % more or 293 l.
      Front axle standard operating weight 18761 kg and 3700 kg 80 % more or 15061 kg

      Motor

      Effective speeds output 5-6 397.5 kW and 104.4 kW 74 % more or 293.1 kW
      Effective speeds output 7-8 397.5 kW and 104.4 kW 74 % more or 293.1 kW
      Maximum power 397.5 kW and 104.4 kW 74 % more or 293.1 kW
      Effective drives torque 7-8 2389 Nm and 657.6 Nm 72 % more or 1731.4 Nm
      Displacement 18.1 l. and 5.9 l. 67 % more or 12.2 l.

      Gear box

      Maximum reverse gear 41.2 km/h and 30 km/h 27 % more or 11.2 km/h
      Maximum forward speed 43 km/h and 42.9 km/h 0 % more or 0.1 km/h

      Front Axle

      Clearance 858 mm and 610 mm 29 % more or 248 mm

      Circle

      Maximum lifting above ground level 634 mm and 445 mm 30 % more or 189 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Blade base 2562 mm and 4048 mm
      Dual axis wheelbase 1594 mm and 2285 mm
      Height to cab upper part 3140 mm and 4352 mm
      Dimensional length 8521 mm and 14194 mm
      Between tyres width 2512 mm and 4280 mm
      Wheelbase 6219 mm and 10278 mm

      Operation

      Overall standard operating weight 13506 kg and 62456 kg
      Total maximum operating weight 13506 kg and 66138 kg
      Tyre size 14x24 12 layers G2 and 29.5-29 28PR

      Motor

      Model Cummins 6A 5.9 and C18 ACERT
      Manufacturer BT and Caterpillar
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump with load sensing and variable displacement piston pump
      Overflow valve pressure 17926.4 kPa and 24150 kPa

      Gear box

      Transmission type powershift transmission with direct drive and automatic, electronically controlled gear shifting under load

      Front Axle

      Wheel tilt 25 degrees and 18 degrees
      General fluctuations 20 degrees and 32 degrees

      Dump

      Mouldboard thickness 22 mm and 50 mm
      Left lateral displacement 533 mm and 870 mm
      Lateral right shift 686 mm and 1244 mm
      Mouldboard width 3658 mm and 7315 mm
      Mouldboard height 622 mm and 1067 mm

      Circle

      Diameter 1753 mm and 2631 mm

      Images

      Sizes

      1. Dimensional length 8521 mm 1. Dimensional length 14194 mm
      2. Between tyres width 2512 mm 2. Between tyres width 4280 mm
      3. Height to cab upper part 3140 mm 3. Height to cab upper part 4352 mm
      4. Wheelbase 6219 mm 4. Wheelbase 10278 mm
      5. Rear ground clearance 378 mm 5. Rear ground clearance 507 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 2285 mm
      8. Blade base 2562 mm 8. Blade base 4048 mm