vs.

      New Holland RG140.B vs. John Deere 870D

      8 reasons to buy New Holland RG140.B:

      Operation

      Hydraulic system fluid volume 180 l. and 53 l. 71 % more or 127 l.
      Transmission fluid volume 25 l. and 22.7 l. 9 % more or 2.3 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump flow rate 191.2 l/min and 207 l/min 8 % less or 15.8 l/min

      Gear box

      Maximum forward speed 42.9 km/h and 41.1 km/h 4 % more or 1.8 km/h

      Circle

      Maximum radius outside left tyres 1978 mm and 2320 mm 15 % less or 342 mm
      Right maximum radius outside tyres 2174 mm and 2310 mm 6 % less or 136 mm
      Maximum lifting above ground level 445 mm and 437 mm 2 % more or 8 mm

      19 reasons to buy John Deere 870D:

      Steerage

      Turn radius 7 m and 7250 m 100 % less or 7243 m

      Operation

      Front axle standard operating weight 4173 kg and 3700 kg 11 % more or 473 kg
      Rear differential/final drive fluid volume 36 l. and 29 l. 19 % more or 7 l.
      Rear axle standard operating weight 11589 kg and 9707 kg 16 % more or 1882 kg
      Circular gearbox fluid volume 5.7 l. and 2.8 l. 51 % more or 2.9 l.
      Each tandem case fluid volume 75.7 l. and 29 l. 62 % more or 46.7 l.
      Front axle maximum operating weight 7268 kg and 3700 kg 49 % more or 3568 kg
      Rear axle maximum operating weight 14777 kg and 9807 kg 34 % more or 4970 kg
      Generator current strength 100 amperes and 70 amperes 30 % more or 30 amperes
      Fuel Capacity 401.2 l. and 341 l. 15 % more or 60.2 l.
      Cooling system fluid volume 49.2 l. and 40 l. 19 % more or 9.2 l.

      Motor

      Displacement 8.1 l. and 5.9 l. 27 % more or 2.2 l.
      Effective speeds output 5-6 149 kW and 104.4 kW 30 % more or 44.6 kW
      Effective speeds output 7-8 175.2 kW and 104.4 kW 40 % more or 70.8 kW
      Maximum power 175.2 kW and 104.4 kW 40 % more or 70.8 kW
      Effective drives torque 7-8 1238 Nm and 657.6 Nm 47 % more or 580.4 Nm

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 41.1 km/h and 30 km/h 27 % more or 11.1 km/h

      Front Axle

      Clearance 638 mm and 610 mm 4 % more or 28 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Height to cab upper part 3140 mm and 3180 mm
      Dimensional length 8521 mm and 8804 mm
      Between tyres width 2512 mm and 2510 mm
      Wheelbase 6219 mm and 6120 mm
      Blade base 2562 mm and 2533 mm
      Dual axis wheelbase 1594 mm and 1540 mm

      Operation

      Overall standard operating weight 13506 kg and 15760 kg
      Tyre size 14x24 12 layers G2 and 14.00R24 Radial PR
      Operating voltage 24 V and 24 V
      Total maximum operating weight 13506 kg and 22045 kg

      Motor

      Manufacturer BT and John Deere
      Aspiration turbocharging and Turbocharged engine with subsequent cooling of charging air by oncoming air flow
      Model Cummins 6A 5.9 and 6081H
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump with load sensing and variable displacement piston pump
      Overflow valve pressure 17926.4 kPa and 18960.6 kPa

      Gear box

      Transmission type powershift transmission with direct drive and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 25 degrees and 20 degrees
      General fluctuations 20 degrees and 32 degrees

      Dump

      Mouldboard width 3658 mm and 4300 mm
      Mouldboard height 622 mm and 686 mm
      Mouldboard thickness 22 mm and 25 mm
      Left lateral displacement 533 mm and 680 mm
      Lateral right shift 686 mm and 680 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1753 mm and 1520 mm
      Rotating 360 degrees and 360 degrees
      Blade tilt front angle 42 degrees and 42 degrees

      Images

      Sizes

      1. Dimensional length 8521 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2512 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3140 mm 3. Height to cab upper part 3180 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6120 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2562 mm 8. Blade base 2533 mm