- Home/
- Comparison/
- Grader/
- New Holland RG170.B vs. Caterpillar 12G
New Holland RG170.B vs. Caterpillar 12G
13 reasons to buy New Holland RG170.B:
Operation
Generator current strength | 70 amperes and 19 amperes | 73 % more or 51 amperes |
Front axle standard operating weight | 4250 kg and 3570 kg | 16 % more or 680 kg |
Rear axle standard operating weight | 10300 kg and 9130 kg | 11 % more or 1170 kg |
Fuel Capacity | 341 l. and 283 l. | 17 % more or 58 l. |
Hydraulic system fluid volume | 180 l. and 76 l. | 58 % more or 104 l. |
Motor
Maximum power | 149.1 kW and 100.7 kW | 32 % more or 48.4 kW |
Effective speeds output 5-6 | 149.1 kW and 100.7 kW | 32 % more or 48.4 kW |
Hydraulic system
Pump flow rate | 185.5 l/min and 193 l/min | 4 % less or 7.5 l/min |
Gear box
Maximum forward speed | 42.9 km/h and 41 km/h | 4 % more or 1.9 km/h |
Forward gears number | 8 and 6 | 25 % more or 2 |
Front Axle
Clearance | 622 mm and 610 mm | 2 % more or 12 mm |
Dump
Maximum cutting depth | 711 mm and 450 mm | 37 % more or 261 mm |
Circle
Maximum lifting above ground level | 445 mm and 438 mm | 2 % more or 7 mm |
10 reasons to buy Caterpillar 12G:
Steerage
Turn radius | 7.3 m and 7289 m | 100 % less or 7281.7 m |
Operation
Cooling system fluid volume | 47 l. and 40 l. | 15 % more or 7 l. |
Transmission fluid volume | 87 l. and 28.5 l. | 67 % more or 58.5 l. |
Each tandem case fluid volume | 64 l. and 22.7 l. | 65 % more or 41.3 l. |
Motor
Displacement | 10.5 l. and 5.9 l. | 44 % more or 4.6 l. |
Gear box
Reverse gears number | 6 and 4 | 33 % more or 2 |
Maximum reverse gear | 41 km/h and 30 km/h | 27 % more or 11 km/h |
Circle
Blade tilt front angle | 90 degrees and 42 degrees | 53 % more or 48 degrees |
Maximum radius outside left tyres | 1830 mm and 1978 mm | 7 % less or 148 mm |
Right maximum radius outside tyres | 1870 mm and 2174 mm | 14 % less or 304 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 50 degrees |
Sizes
Between tyres width | 2512 mm and 2410 mm |
Wheelbase | 6219 mm and 5920 mm |
Blade base | 2562 mm and 2570 mm |
Height to cab upper part | 3140 mm and 3330 mm |
Dual axis wheelbase | 1594 mm and 1520 mm |
Dimensional length | 9309 mm and 8310 mm |
Operation
Overall standard operating weight | 14550 kg and 12700 kg |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Cummins and Caterpillar |
Hydraulic system
Type of pump | variable displacement piston pump with load sensing and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume |
Overflow valve pressure | 19305.3 kPa and 14823.7 kPa |
Gear box
Transmission type | powershift transmission with direct drive and Powershift transmission with direct drive |
Front Axle
General fluctuations | 20 degrees and 32 degrees |
Wheel tilt | 48 degrees and 18 degrees |
Dump
Mouldboard thickness | 22 mm and 22 mm |
Left lateral displacement | 533 mm and 670 mm |
Lateral right shift | 686 mm and 520 mm |
Mouldboard width | 3658 mm and 3650 mm |
Mouldboard height | 622 mm and 610 mm |
Circle
Blade tilt rear angle | 90 degrees and 90 degrees |
Diameter | 1753 mm and 1530 mm |
Rotating | 360 degrees and 360 degrees |
Images
Sizes
1. Dimensional length | 9309 mm | 1. Dimensional length | 8310 mm |
2. Between tyres width | 2512 mm | 2. Between tyres width | 2410 mm |
3. Height to cab upper part | 3140 mm | 3. Height to cab upper part | 3330 mm |
4. Wheelbase | 6219 mm | 4. Wheelbase | 5920 mm |
7. Dual axis wheelbase | 1594 mm | 7. Dual axis wheelbase | 1520 mm |
8. Blade base | 2562 mm | 8. Blade base | 2570 mm |