vs.

      New Holland RG170.B vs. Caterpillar 160M2

      9 reasons to buy New Holland RG170.B:

      Sizes

      Rear ground clearance 378 mm and 344 mm 9 % more or 34 mm

      Operation

      Front axle standard operating weight 4250 kg and 4236.1 kg 0 % more or 13.9 kg
      Hydraulic system fluid volume 180 l. and 99.9 l. 44 % more or 80.1 l.

      Hydraulic system

      Pump flow rate 185.5 l/min and 210.1 l/min 12 % less or 24.6 l/min

      Front Axle

      Clearance 622 mm and 600 mm 4 % more or 22 mm

      Circle

      Maximum radius outside left tyres 1978 mm and 2090 mm 5 % less or 112 mm
      Right maximum radius outside tyres 2174 mm and 2278 mm 5 % less or 104 mm
      Blade tilt front angle 42 degrees and 40 degrees 5 % more or 2 degrees
      Blade tilt rear angle 90 degrees and 5 degrees 94 % more or 85 degrees

      15 reasons to buy Caterpillar 160M2:

      Steerage

      Turn radius 7.8 m and 7289 m 100 % less or 7281.2 m

      Operation

      Generator current strength 150 amperes and 70 amperes 53 % more or 80 amperes
      Fuel Capacity 416.4 l. and 341 l. 18 % more or 75.4 l.
      Cooling system fluid volume 56 l. and 40 l. 29 % more or 16 l.
      Rear axle standard operating weight 13059.8 kg and 10300 kg 21 % more or 2759.8 kg
      Transmission fluid volume 65.1 l. and 28.5 l. 56 % more or 36.6 l.
      Circular gearbox fluid volume 6.8 l. and 2.8 l. 59 % more or 4.0 l.
      Each tandem case fluid volume 64 l. and 22.7 l. 65 % more or 41.3 l.

      Motor

      Effective drives torque 7-8 1355.8 Nm and 862.3 Nm 36 % more or 493.5 Nm
      Effective speeds output 7-8 181.2 kW and 149.1 kW 18 % more or 32.1 kW

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 46.7 km/h and 42.9 km/h 8 % more or 3.8 km/h
      Maximum reverse gear 36.9 km/h and 30 km/h 19 % more or 6.9 km/h

      Dump

      Maximum cutting depth 750 mm and 711 mm 5 % more or 39 mm

      Circle

      Maximum lifting above ground level 452 mm and 445 mm 2 % more or 7 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 20 degrees

      Sizes

      Wheelbase 6219 mm and 6126 mm
      Blade base 2562 mm and 2557 mm
      Dual axis wheelbase 1594 mm and 1523 mm
      Height to cab upper part 3140 mm and 3287 mm
      Dimensional length 9309 mm and 8898 mm
      Between tyres width 2512 mm and 2581 mm

      Operation

      Overall standard operating weight 14550 kg and 17295.9 kg
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Cummins and Caterpillar
      Model QSB 5.9 and C9.3 ACERT VHP

      Hydraulic system

      Type of pump variable displacement piston pump with load sensing and variable displacement piston pump
      Overflow valve pressure 19305.3 kPa and 24152.3 kPa

      Gear box

      Transmission type powershift transmission with direct drive and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 48 degrees and 18 degrees
      General fluctuations 20 degrees and 32 degrees

      Dump

      Mouldboard height 622 mm and 609.6 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 533 mm and 510 mm
      Lateral right shift 686 mm and 660 mm
      Lowered blade pressure 9355.8 kg and 10380 kg
      Mouldboard width 3658 mm and 4267.2 mm

      Circle

      Diameter 1753 mm and 1530 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      3. Height to cab upper part 3140 mm 3. Height to cab upper part 3287 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6126 mm
      5. Rear ground clearance 378 mm 5. Rear ground clearance 344 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1523 mm
      8. Blade base 2562 mm 8. Blade base 2557 mm
      1. Dimensional length 9309 mm 1. Dimensional length 8898 mm
      2. Between tyres width 2512 mm 2. Between tyres width 2581 mm