vs.

      New Holland RG170.B vs. John Deere 770CH

      9 reasons to buy New Holland RG170.B:

      Operation

      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes
      Front axle standard operating weight 4250 kg and 3987.1 kg 6 % more or 262.9 kg
      Hydraulic system fluid volume 180 l. and 59 l. 67 % more or 121 l.

      Motor

      Effective speeds output 1-2 126.8 kW and 123 kW 3 % more or 3.8 kW
      Effective speeds output 3-4 149.1 kW and 138 kW 7 % more or 11.1 kW

      Hydraulic system

      Pump flow rate 185.5 l/min and 207.1 l/min 10 % less or 21.6 l/min

      Gear box

      Maximum forward speed 42.9 km/h and 41.5 km/h 3 % more or 1.4 km/h

      Circle

      Blade tilt rear angle 90 degrees and 5 degrees 94 % more or 85 degrees
      Maximum radius outside left tyres 1978 mm and 2160 mm 8 % less or 182 mm

      22 reasons to buy John Deere 770CH:

      Steerage

      Turn radius 6.7 m and 7289 m 100 % less or 7282.3 m

      Operation

      Transmission fluid volume 38 l. and 28.5 l. 25 % more or 9.5 l.
      Rear differential/final drive fluid volume 36 l. and 29 l. 19 % more or 7 l.
      Circular gearbox fluid volume 3.8 l. and 2.8 l. 26 % more or 1.0 l.
      Rear axle standard operating weight 10301.1 kg and 10300 kg 0 % more or 1.1 kg
      Each tandem case fluid volume 75 l. and 22.7 l. 70 % more or 52.3 l.
      Fuel Capacity 401.3 l. and 341 l. 15 % more or 60.3 l.
      Cooling system fluid volume 45.4 l. and 40 l. 12 % more or 5.4 l.

      Motor

      Effective drives torque 7-8 924.7 Nm and 862.3 Nm 7 % more or 62.4 Nm
      Displacement 8.1 l. and 5.9 l. 27 % more or 2.2 l.
      Effective speeds output 5-6 152.9 kW and 149.1 kW 2 % more or 3.8 kW
      Effective speeds output 7-8 152.9 kW and 149.1 kW 2 % more or 3.8 kW
      Maximum power 152.9 kW and 149.1 kW 2 % more or 3.8 kW
      Effective drives torque 1-2 772.8 Nm and 695.5 Nm 10 % more or 77.3 Nm
      Effective drives torque 3-4 922 Nm and 862.3 Nm 6 % more or 59.7 Nm
      Effective drives torque 5-6 924.7 Nm and 862.3 Nm 7 % more or 62.4 Nm

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 41.5 km/h and 30 km/h 28 % more or 11.5 km/h

      Front Axle

      Clearance 638 mm and 622 mm 3 % more or 16 mm

      Circle

      Blade tilt front angle 49 degrees and 42 degrees 14 % more or 7 degrees
      Right maximum radius outside tyres 2110 mm and 2174 mm 3 % less or 64 mm
      Maximum lifting above ground level 470 mm and 445 mm 5 % more or 25 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Dimensional length 9309 mm and 8610 mm
      Between tyres width 2512 mm and 2510 mm
      Height to cab upper part 3140 mm and 3120 mm
      Wheelbase 6219 mm and 5970 mm
      Blade base 2562 mm and 2670 mm
      Dual axis wheelbase 1594 mm and 1540 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 14550 kg and 14288.2 kg
      Tyre size Fireston 14 x 24 10 layers 9" 1-pc. rim and 14.00-24

      Motor

      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Cummins and John Deere
      Model QSB 5.9 and 6081H

      Hydraulic system

      Type of pump variable displacement piston pump with load sensing and variable displacement with locking in the middle position
      Overflow valve pressure 19305.3 kPa and 17581.6 kPa

      Gear box

      Transmission type powershift transmission with direct drive and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 48 degrees and 20 degrees
      General fluctuations 20 degrees and 32 degrees

      Dump

      Mouldboard width 3658 mm and 3657.6 mm
      Mouldboard height 622 mm and 609.6 mm
      Mouldboard thickness 22 mm and 22.4 mm
      Left lateral displacement 533 mm and 683 mm
      Lateral right shift 686 mm and 683 mm

      Circle

      Diameter 1753 mm and 1520 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 9309 mm 1. Dimensional length 8610 mm
      2. Between tyres width 2512 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3140 mm 3. Height to cab upper part 3120 mm
      4. Wheelbase 6219 mm 4. Wheelbase 5970 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2562 mm 8. Blade base 2670 mm