vs.

      Sany PQ160III vs. John Deere 770CH

      8 reasons to buy Sany PQ160III:

      Steerage

      Turn radius 3.1 m and 6.7 m 54 % less or 3.6 m

      Motor

      Effective speeds output 1-2 129 kW and 123 kW 5 % more or 6 kW
      Power measured at 2200 rev / min and 1900 rev / min 14 % more or 300 rev
      Maximum power 173 kW and 152.9 kW 12 % more or 20.1 kW

      Circle

      Maximum radius outside left tyres 59 mm and 2160 mm 97 % less or 2101 mm
      Right maximum radius outside tyres 58 mm and 2110 mm 97 % less or 2052 mm
      Blade tilt front angle 90 degrees and 49 degrees 46 % more or 41 degrees
      Blade tilt rear angle 90 degrees and 5 degrees 94 % more or 85 degrees

      4 reasons to buy John Deere 770CH:

      Gear box

      Reverse gears number 8 and 3 62 % more or 5
      Forward gears number 8 and 6 25 % more or 2
      Maximum forward speed 41.5 km/h and 32 km/h 23 % more or 9.5 km/h
      Maximum reverse gear 41.5 km/h and 32 km/h 23 % more or 9.5 km/h

      Neutral reasons:

      Sizes

      Height to cab upper part 3218 mm and 3120 mm
      Dimensional length 3660 mm and 8610 mm
      Between tyres width 2740 mm and 2510 mm

      Operation

      Overall standard operating weight 14000 kg and 14288.2 kg

      Motor

      Model QSB6.7-C173 and 6081H
      Manufacturer Cummins and John Deere
      Cylinders number 6 and 6

      Gear box

      Transmission type Hydro-Static Transmission and powershift

      Front Axle

      Wheel tilt 17 degrees and 20 degrees
      General fluctuations 15 degrees and 32 degrees

      Dump

      Mouldboard width 3660 mm and 3657.6 mm
      Mouldboard height 610 mm and 609.6 mm
      Mouldboard thickness 22 mm and 22.4 mm

      Circle

      Maximum lifting above ground level 470 mm and 470 mm

      Images

      Sizes

      3. Height to cab upper part 3218 mm 3. Height to cab upper part 3120 mm
      1. Dimensional length 3660 mm 1. Dimensional length 8610 mm
      2. Between tyres width 2740 mm 2. Between tyres width 2510 mm