vs.

      Sany PQ160III vs. Komatsu GD655-3

      5 reasons to buy Sany PQ160III:

      Steerage

      Turn radius 3.1 m and 6.9 m 55 % less or 3.8 m

      Motor

      Power measured at 2200 rev / min and 1900 rev / min 14 % more or 300 rev
      Maximum power 173 kW and 149.1 kW 14 % more or 23.9 kW

      Circle

      Blade tilt front angle 90 degrees and 40 degrees 56 % more or 50 degrees
      Blade tilt rear angle 90 degrees and 5 degrees 94 % more or 85 degrees

      6 reasons to buy Komatsu GD655-3:

      Motor

      Effective speeds output 1-2 134 kW and 129 kW 4 % more or 5 kW

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 42.2 km/h and 32 km/h 24 % more or 10.2 km/h
      Maximum reverse gear 38.4 km/h and 32 km/h 17 % more or 6.4 km/h

      Circle

      Maximum lifting above ground level 505 mm and 470 mm 7 % more or 35 mm

      Neutral reasons:

      Sizes

      Dimensional length 3660 mm and 10280 mm
      Between tyres width 2740 mm and 2550 mm
      Height to cab upper part 3218 mm and 3120 mm

      Operation

      Overall standard operating weight 14000 kg and 15400 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer Cummins and Komatsu
      Model QSB6.7-C173 and SAA6D114E-3

      Gear box

      Transmission type Hydro-Static Transmission and powershift transmission

      Front Axle

      Wheel tilt 17 degrees and 20 degrees
      General fluctuations 15 degrees and 32 degrees

      Dump

      Mouldboard width 3660 mm and 3710 mm
      Mouldboard height 610 mm and 660 mm
      Mouldboard thickness 22 mm and 22 mm

      Images

      Sizes

      1. Dimensional length 3660 mm 1. Dimensional length 10280 mm
      2. Between tyres width 2740 mm 2. Between tyres width 2550 mm
      3. Height to cab upper part 3218 mm 3. Height to cab upper part 3120 mm