vs.

      Sany PQ160III vs. Mitsubishi MG530-E

      5 reasons to buy Sany PQ160III:

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Maximum power 173 kW and 138 kW 20 % more or 35 kW

      Circle

      Maximum lifting above ground level 470 mm and 460 mm 2 % more or 10 mm
      Blade tilt front angle 90 degrees and 40 degrees 56 % more or 50 degrees
      Blade tilt rear angle 90 degrees and 9 degrees 90 % more or 81 degrees

      3 reasons to buy Mitsubishi MG530-E:

      Gear box

      Maximum reverse gear 47.5 km/h and 32 km/h 33 % more or 15.5 km/h
      Reverse gears number 6 and 3 50 % more or 3
      Maximum forward speed 46.6 km/h and 32 km/h 31 % more or 14.6 km/h

      Neutral reasons:

      Sizes

      Height to cab upper part 3218 mm and 3140 mm
      Dimensional length 3660 mm and 8745 mm
      Between tyres width 2740 mm and 2665 mm

      Operation

      Overall standard operating weight 14000 kg and 18225 kg

      Motor

      Manufacturer Cummins and Mitsubishi
      Model QSB6.7-C173 and 6D22-T
      Cylinders number 6 and 6

      Gear box

      Transmission type Hydro-Static Transmission and planetary gear
      Forward gears number 6 and 6

      Front Axle

      Wheel tilt 17 degrees and 20 degrees
      General fluctuations 15 degrees and 30 degrees

      Dump

      Mouldboard height 610 mm and 720 mm
      Mouldboard thickness 22 mm and 22 mm

      Images

      Sizes

      1. Dimensional length 3660 mm 1. Dimensional length 8745 mm
      2. Between tyres width 2740 mm 2. Between tyres width 2665 mm
      3. Height to cab upper part 3218 mm 3. Height to cab upper part 3140 mm