- Home/
- Comparison/
- Grader/
- Terex TG150 vs. Caterpillar 160H
Terex TG150 vs. Caterpillar 160H
7 reasons to buy Terex TG150:
Steerage
Turn radius | 6.9 m and 7.4 m | 7 % less or 0.5 m |
Operation
Generator current strength | 55 amperes and 35 amperes | 36 % more or 20 amperes |
Cooling system fluid volume | 45 l. and 38 l. | 16 % more or 7 l. |
Hydraulic system fluid volume | 150 l. and 80 l. | 47 % more or 70 l. |
Motor
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Hydraulic system
Pump flow rate | 99 l/min and 260 l/min | 62 % less or 161 l/min |
Circle
Maximum lifting above ground level | 480 mm and 452 mm | 6 % more or 28 mm |
16 reasons to buy Caterpillar 160H:
Operation
Rear differential/final drive fluid volume | 47 l. and 15 l. | 68 % more or 32 l. |
Circular gearbox fluid volume | 7 l. and 6 l. | 14 % more or 1 l. |
Front axle standard operating weight | 4589 kg and 4300 kg | 6 % more or 289 kg |
Each tandem case fluid volume | 64 l. and 40 l. | 37 % more or 24 l. |
Rear axle standard operating weight | 11691 kg and 10200 kg | 13 % more or 1491 kg |
Fuel Capacity | 397 l. and 310 l. | 22 % more or 87 l. |
Motor
Effective speeds output 5-6 | 149.1 kW and 121.5 kW | 19 % more or 27.6 kW |
Maximum power | 149.1 kW and 121.5 kW | 19 % more or 27.6 kW |
Displacement | 10.3 l. and 6 l. | 42 % more or 4.3 l. |
Gear box
Reverse gears number | 6 and 3 | 50 % more or 3 |
Maximum forward speed | 43.6 km/h and 40 km/h | 8 % more or 3.6 km/h |
Maximum reverse gear | 34.4 km/h and 25 km/h | 27 % more or 9.4 km/h |
Forward gears number | 8 and 6 | 25 % more or 2 |
Dump
Blade pulling at maximum weight | 20071 kg and 8161.9 kg | 59 % more or 11909.1 kg |
Circle
Maximum radius outside left tyres | 2223 mm and 2500 mm | 11 % less or 277 mm |
Right maximum radius outside tyres | 2261 mm and 3180 mm | 29 % less or 919 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 45 degrees and 20 degrees |
Sizes
Wheelbase | 5676 mm and 6169 mm |
Dual axis wheelbase | 1555 mm and 1523 mm |
Height to cab upper part | 3276 mm and 3356 mm |
Dimensional length | 9402 mm and 10097 mm |
Between tyres width | 2419 mm and 2460 mm |
Operation
Tyre size | 13.00 -24 TG SGG-2A Goodyear and 10-24 12PR |
Overall standard operating weight | 14500 kg and 16280 kg |
Operating voltage | 24 V and 24 V |
Motor
Cylinders number | 6 and 6 |
Manufacturer | Cummins and Caterpillar |
Hydraulic system
Overflow valve pressure | 18402.1 kPa and 24150 kPa |
Type of pump | axial piston pump and Axial-piston pump |
Front Axle
Wheel tilt | 17 degrees and 18 degrees |
General fluctuations | 15 degrees and 32 degrees |
Dump
Mouldboard width | 3660 mm and 4267 mm |
Mouldboard height | 580 mm and 686 mm |
Mouldboard thickness | 20 mm and 25 mm |
Left lateral displacement | 1250 mm and 851 mm |
Lateral right shift | 1250 mm and 943 mm |
Images
Sizes
7. Dual axis wheelbase | 1555 mm | 7. Dual axis wheelbase | 1523 mm |
1. Dimensional length | 9402 mm | 1. Dimensional length | 10097 mm |
2. Between tyres width | 2419 mm | 2. Between tyres width | 2460 mm |
3. Height to cab upper part | 3276 mm | 3. Height to cab upper part | 3356 mm |
4. Wheelbase | 5676 mm | 4. Wheelbase | 6169 mm |