vs.

      Terex TG150 vs. John Deere 672CH

      7 reasons to buy Terex TG150:

      Operation

      Rear axle standard operating weight 10200 kg and 10095 kg 1 % more or 105 kg
      Cooling system fluid volume 45 l. and 42 l. 7 % more or 3 l.
      Hydraulic system fluid volume 150 l. and 59 l. 61 % more or 91 l.
      Circular gearbox fluid volume 6 l. and 3.8 l. 37 % more or 2.2 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump flow rate 99 l/min and 173 l/min 43 % less or 74 l/min

      Circle

      Maximum lifting above ground level 480 mm and 444 mm 7 % more or 36 mm

      17 reasons to buy John Deere 672CH:

      Sizes

      Front part clearance 559 mm and 546 mm 2 % more or 13 mm

      Operation

      Front axle standard operating weight 4563 kg and 4300 kg 6 % more or 263 kg
      Each tandem case fluid volume 75 l. and 40 l. 47 % more or 35 l.
      Fuel Capacity 403 l. and 310 l. 23 % more or 93 l.
      Transmission fluid volume 38 l. and 18 l. 53 % more or 20 l.
      Rear differential/final drive fluid volume 36 l. and 15 l. 58 % more or 21 l.

      Motor

      Effective speeds output 5-6 147.6 kW and 121.5 kW 18 % more or 26.1 kW
      Maximum power 147.6 kW and 121.5 kW 18 % more or 26.1 kW
      Displacement 6.8 l. and 6 l. 12 % more or 0.8 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 8 and 3 62 % more or 5
      Maximum forward speed 40.2 km/h and 40 km/h 0 % more or 0.2 km/h
      Maximum reverse gear 40.2 km/h and 25 km/h 38 % more or 15.2 km/h

      Front Axle

      Clearance 559 mm and 546 mm 2 % more or 13 mm

      Dump

      Blade pulling at maximum weight 17827 kg and 8161.9 kg 54 % more or 9665.1 kg

      Circle

      Maximum radius outside left tyres 2160 mm and 2500 mm 14 % less or 340 mm
      Right maximum radius outside tyres 2110 mm and 3180 mm 34 % less or 1070 mm

      Neutral reasons:

      Steerage

      Turn radius 6.9 m and 6.9 m
      Left and right hinge connection 45 degrees and 25 degrees

      Sizes

      Height to cab upper part 3276 mm and 3100 mm
      Dimensional length 9402 mm and 8580 mm
      Between tyres width 2419 mm and 2460 mm
      Wheelbase 5676 mm and 5970 mm
      Blade base 2204 mm and 2670 mm
      Dual axis wheelbase 1555 mm and 1540 mm

      Operation

      Operating voltage 24 V and 24 V
      Generator current strength 55 amperes and 55 amperes
      Overall standard operating weight 14500 kg and 14658 kg
      Tyre size 13.00 -24 TG SGG-2A Goodyear and 13.00-24

      Motor

      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Cylinders number 6 and 6
      Manufacturer Cummins and John Deere

      Hydraulic system

      Type of pump axial piston pump and Closed center variable displacement piston pump
      Overflow valve pressure 18402.1 kPa and 17581.6 kPa

      Gear box

      Transmission type powershift transmission with torque converter and powershift

      Front Axle

      Wheel tilt 17 degrees and 20 degrees
      General fluctuations 15 degrees and 32 degrees

      Dump

      Mouldboard width 3660 mm and 3.7 mm
      Mouldboard height 580 mm and 610 mm
      Mouldboard thickness 20 mm and 22 mm
      Left lateral displacement 1250 mm and 683 mm
      Lateral right shift 1250 mm and 683 mm

      Circle

      Diameter 1348 mm and 1520 mm

      Images

      Sizes

      1. Dimensional length 9402 mm 1. Dimensional length 8580 mm
      2. Between tyres width 2419 mm 2. Between tyres width 2460 mm
      3. Height to cab upper part 3276 mm 3. Height to cab upper part 3100 mm
      4. Wheelbase 5676 mm 4. Wheelbase 5970 mm
      6. Front part clearance 546 mm 6. Front part clearance 559 mm
      7. Dual axis wheelbase 1555 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2204 mm 8. Blade base 2670 mm