vs.

      Terex TG150TA-3 vs. Caterpillar 135H

      12 reasons to buy Terex TG150TA-3:

      Sizes

      Rear ground clearance 474 mm and 351 mm 26 % more or 123 mm
      Front part clearance 474 mm and 351 mm 26 % more or 123 mm

      Operation

      Rear axle standard operating weight 10200 kg and 9343.1 kg 8 % more or 856.9 kg
      Cooling system fluid volume 45 l. and 39.4 l. 12 % more or 5.6 l.
      Hydraulic system fluid volume 150 l. and 67 l. 55 % more or 83 l.
      Generator current strength 55 amperes and 35 amperes 36 % more or 20 amperes
      Front axle standard operating weight 4300 kg and 3738.5 kg 13 % more or 561.5 kg

      Motor

      Effective speeds output 5-6 121.5 kW and 115.6 kW 5 % more or 5.9 kW
      Maximum power 121.5 kW and 115.6 kW 5 % more or 5.9 kW

      Hydraulic system

      Pump flow rate 99 l/min and 144 l/min 31 % less or 45 l/min

      Dump

      Blade pulling at maximum weight 11648.7 kg and 11505 kg 1 % more or 143.7 kg

      Circle

      Maximum lifting above ground level 480 mm and 457 mm 5 % more or 23 mm

      10 reasons to buy Caterpillar 135H:

      Steerage

      Turn radius 7.3 m and 6900 m 100 % less or 6892.7 m

      Operation

      Fuel Capacity 340.7 l. and 310 l. 9 % more or 30.7 l.
      Circular gearbox fluid volume 6.8 l. and 6 l. 12 % more or 0.8 l.
      Each tandem case fluid volume 48.1 l. and 20 l. 58 % more or 28.1 l.

      Motor

      Displacement 7.2 l. and 6 l. 17 % more or 1.2 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 6 and 3 50 % more or 3
      Maximum forward speed 42 km/h and 40 km/h 5 % more or 2 km/h
      Maximum reverse gear 33.2 km/h and 25 km/h 25 % more or 8.2 km/h

      Front Axle

      Clearance 608 mm and 546 mm 10 % more or 62 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 45 degrees and 20 degrees

      Sizes

      Height to cab upper part 3276 mm and 3332 mm
      Dimensional length 9402 mm and 10064 mm
      Between tyres width 2419 mm and 2402 mm
      Wheelbase 5676 mm and 5923 mm
      Blade base 2204 mm and 2596 mm
      Dual axis wheelbase 510 mm and 1510 mm

      Operation

      Overall standard operating weight 14500 kg and 13081.6 kg
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Cummins and Caterpillar

      Hydraulic system

      Type of pump axial piston pump and variable displacement piston pump
      Overflow valve pressure 127.8 kPa and 24131.6 kPa

      Gear box

      Transmission type powershift transmission with torque converter and direct drive, powershift

      Front Axle

      Wheel tilt 17 degrees and 18 degrees
      General fluctuations 15 degrees and 32 degrees

      Dump

      Mouldboard width 3660 mm and 3658 mm
      Mouldboard height 580 mm and 610 mm
      Mouldboard thickness 20 mm and 22 mm
      Left lateral displacement 1250 mm and 524 mm
      Lateral right shift 1250 mm and 660 mm

      Images

      Sizes

      1. Dimensional length 9402 mm 1. Dimensional length 10064 mm
      2. Between tyres width 2419 mm 2. Between tyres width 2402 mm
      3. Height to cab upper part 3276 mm 3. Height to cab upper part 3332 mm
      4. Wheelbase 5676 mm 4. Wheelbase 5923 mm
      5. Rear ground clearance 474 mm 5. Rear ground clearance 351 mm
      6. Front part clearance 474 mm 6. Front part clearance 351 mm
      7. Dual axis wheelbase 510 mm 7. Dual axis wheelbase 1510 mm
      8. Blade base 2204 mm 8. Blade base 2596 mm