vs.

      Volvo G710 VHP vs. Case 845 DHP

      4 reasons to buy Volvo G710 VHP:

      Operation

      Front axle standard operating weight 4264 kg and 3707 kg 13 % more or 557 kg

      Motor

      Torque measured at 1600 rev / min and 1500 rev / min 6 % more or 100 rev

      Hydraulic system

      Pump flow rate 191 l/min and 191.5 l/min 0 % less or 0.5 l/min

      Dump

      Maximum cutting depth 826 mm and 711.2 mm 14 % more or 114.8 mm

      5 reasons to buy Case 845 DHP:

      Steerage

      Turn radius 7.2 m and 7.7 m 6 % less or 0.5 m

      Operation

      Rear axle standard operating weight 9828 kg and 9630 kg 2 % more or 198 kg

      Motor

      Displacement 6.7 l. and 5.9 l. 12 % more or 0.8 l.
      Maximum power 119.3 kW and 104.4 kW 12 % more or 14.9 kW

      Gear box

      Maximum forward speed 42.9 km/h and 39.8 km/h 7 % more or 3.1 km/h

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Wheelbase 6096 mm and 6219 mm
      Dimensional length 8458 mm and 8534 mm
      Blade base 2616 mm and 2562 mm
      Between tyres width 2489 mm and 2510 mm

      Operation

      Overall standard operating weight 13894 kg and 13535 kg

      Motor

      Aspiration turbocharging and Turbocharging with charge air cooler
      Manufacturer Cummins and Cummins
      Model 6B5.9 and QSB 6.7, III Level III certified
      Power measured at 2200 rev / min and 2200 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump hydraulic system with load sensing and Gear pump with locking in the middle position, with load sensing

      Gear box

      Reverse gears number 4 and 4
      Maximum reverse gear 28.5 km/h and 28.5 km/h
      Transmission type Volvo 8400 and Powershift of the camshaft with direct drive with electronic shift control and inching pedal
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 17.5 degrees
      General fluctuations 16 degrees and 19 degrees

      Dump

      Mouldboard width 3658 mm and 3658 mm
      Mouldboard height 635 mm and 559 mm
      Mouldboard thickness 22.2 mm and 22.2 mm
      Left lateral displacement 774.7 mm and 533 mm
      Lateral right shift 774.7 mm and 686 mm

      Circle

      Diameter 1683 mm and 1752.6 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8458 mm 1. Dimensional length 8534 mm
      2. Between tyres width 2489 mm 2. Between tyres width 2510 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6219 mm
      8. Blade base 2616 mm 8. Blade base 2562 mm