vs.

      Volvo G710 VHP vs. Caterpillar 16M

      4 reasons to buy Volvo G710 VHP:

      Steerage

      Turn radius 7.7 m and 8.9 m 13 % less or 1.2 m

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump flow rate 191 l/min and 280 l/min 32 % less or 89 l/min

      Dump

      Maximum cutting depth 826 mm and 488 mm 41 % more or 338 mm

      10 reasons to buy Caterpillar 16M:

      Operation

      Front axle standard operating weight 7112 kg and 4264 kg 40 % more or 2848 kg
      Rear axle standard operating weight 18948 kg and 9630 kg 49 % more or 9318 kg

      Motor

      Displacement 12.5 l. and 5.9 l. 53 % more or 6.6 l.
      Effective speeds output 1-2 225 kW and 104.4 kW 54 % more or 120.6 kW
      Maximum power 232.7 kW and 104.4 kW 55 % more or 128.3 kW

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 53.9 km/h and 39.8 km/h 26 % more or 14.1 km/h
      Maximum reverse gear 42.6 km/h and 28.5 km/h 33 % more or 14.1 km/h

      Front Axle

      Clearance 688 mm and 597 mm 13 % more or 91 mm

      Dump

      Blade pulling at maximum weight 22297 kg and 8667.7 kg 61 % more or 13629.3 kg

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 20 degrees

      Sizes

      Dimensional length 8458 mm and 9963 mm
      Between tyres width 2489 mm and 3095 mm
      Wheelbase 6096 mm and 6985 mm
      Blade base 2616 mm and 3069 mm

      Operation

      Overall standard operating weight 13894 kg and 26060 kg

      Motor

      Manufacturer Cummins and Caterpillar
      Model 6B5.9 and C13 ACERT VHP
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump hydraulic system with load sensing and variable displacement piston pump
      Overflow valve pressure 17236.9 kPa and 24150 kPa

      Gear box

      Forward gears number 8 and 8
      Transmission type Volvo 8400 and direct drive, powershift, camshaft

      Front Axle

      Wheel tilt 18 degrees and 18.2 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Left lateral displacement 774.7 mm and 740 mm
      Lowered blade pressure 7481.6 kg and 19485 kg
      Lateral right shift 774.7 mm and 1094 mm
      Mouldboard width 3658 mm and 4877 mm
      Mouldboard height 635 mm and 787 mm
      Mouldboard thickness 22.2 mm and 25 mm

      Circle

      Diameter 1683 mm and 1822 mm

      Images

      Sizes

      1. Dimensional length 8458 mm 1. Dimensional length 9963 mm
      2. Between tyres width 2489 mm 2. Between tyres width 3095 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6985 mm
      8. Blade base 2616 mm 8. Blade base 3069 mm