vs.

      Volvo G710 VHP vs. John Deere 670C

      3 reasons to buy Volvo G710 VHP:

      Operation

      Front axle standard operating weight 4264 kg and 3919 kg 8 % more or 345 kg

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Torque measured at 1600 rev / min and 1000 rev / min 37 % more or 600 rev

      9 reasons to buy John Deere 670C:

      Steerage

      Turn radius 6.7 m and 7.7 m 13 % less or 1.0 m

      Operation

      Rear axle standard operating weight 9913 kg and 9630 kg 3 % more or 283 kg

      Motor

      Displacement 6.8 l. and 5.9 l. 13 % more or 0.9 l.

      Hydraulic system

      Pump flow rate 173 l/min and 191 l/min 9 % less or 18 l/min

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum forward speed 40.2 km/h and 39.8 km/h 1 % more or 0.4 km/h
      Maximum reverse gear 40.2 km/h and 28.5 km/h 29 % more or 11.7 km/h

      Front Axle

      Clearance 610 mm and 597 mm 2 % more or 13 mm

      Dump

      Blade pulling at maximum weight 10998.7 kg and 8667.7 kg 21 % more or 2331.0 kg

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Between tyres width 2489 mm and 2490 mm
      Wheelbase 6096 mm and 5970 mm
      Blade base 2616 mm and 2670 mm
      Dimensional length 8458 mm and 8580 mm

      Operation

      Overall standard operating weight 13894 kg and 13832 kg

      Motor

      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Cylinders number 6 and 6
      Maximum power 104.4 kW and 104.4 kW
      Manufacturer Cummins and John Deere
      Model 6B5.9 and 6068H

      Hydraulic system

      Type of pump hydraulic system with load sensing and variable displacement with locking in the middle position
      Overflow valve pressure 17236.9 kPa and 17581.6 kPa

      Gear box

      Transmission type Volvo 8400 and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Mouldboard width 3658 mm and 3.7 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Mouldboard height 635 mm and 610 mm
      Left lateral displacement 774.7 mm and 683 mm
      Lateral right shift 774.7 mm and 683 mm

      Circle

      Diameter 1683 mm and 1520 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      8. Blade base 2616 mm 8. Blade base 2670 mm
      1. Dimensional length 8458 mm 1. Dimensional length 8580 mm
      2. Between tyres width 2489 mm 2. Between tyres width 2490 mm
      4. Wheelbase 6096 mm 4. Wheelbase 5970 mm