vs.

      Volvo G710 VHP vs. John Deere 772A

      4 reasons to buy Volvo G710 VHP:

      Operation

      Front axle standard operating weight 4264 kg and 4189.8 kg 2 % more or 74.2 kg

      Motor

      Torque measured at 1600 rev / min and 1300 rev / min 19 % more or 300 rev

      Gear box

      Maximum reverse gear 28.5 km/h and 13.8 km/h 52 % more or 14.7 km/h

      Front Axle

      Clearance 597 mm and 572 mm 4 % more or 25 mm

      7 reasons to buy John Deere 772A:

      Steerage

      Turn radius 6.9 m and 7.7 m 10 % less or 0.8 m

      Operation

      Rear axle standard operating weight 9827.5 kg and 9630 kg 2 % more or 197.5 kg

      Motor

      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev
      Maximum power 111.9 kW and 104.4 kW 7 % more or 7.5 kW
      Displacement 7.6 l. and 5.9 l. 22 % more or 1.7 l.

      Hydraulic system

      Pump flow rate 136.3 l/min and 191 l/min 29 % less or 54.7 l/min

      Gear box

      Maximum forward speed 40.4 km/h and 39.8 km/h 1 % more or 0.6 km/h

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Between tyres width 2489 mm and 2440 mm
      Wheelbase 6096 mm and 5970 mm
      Blade base 2616 mm and 2720 mm
      Dimensional length 8458 mm and 8470 mm

      Operation

      Overall standard operating weight 13894 kg and 14017.4 kg

      Motor

      Manufacturer Cummins and John Deere
      Model 6B5.9 and 6-466A
      Cylinders number 6 and 6
      Aspiration turbocharging and Turbocharging with intercooler

      Hydraulic system

      Type of pump hydraulic system with load sensing and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume

      Gear box

      Transmission type Volvo 8400 and powershift
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 16 degrees and 30 degrees

      Dump

      Mouldboard width 3658 mm and 3657.6 mm
      Mouldboard height 635 mm and 609.6 mm
      Mouldboard thickness 22.2 mm and 22.4 mm
      Left lateral displacement 774.7 mm and 683 mm
      Lateral right shift 774.7 mm and 683 mm

      Circle

      Diameter 1683 mm and 1500 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8458 mm 1. Dimensional length 8470 mm
      2. Between tyres width 2489 mm 2. Between tyres width 2440 mm
      4. Wheelbase 6096 mm 4. Wheelbase 5970 mm
      8. Blade base 2616 mm 8. Blade base 2720 mm