- Home/
- Comparison/
- Grader/
- Volvo G710 VHP vs. Volvo G740B
Volvo G710 VHP vs. Volvo G740B
3 reasons to buy Volvo G710 VHP:
Motor
Torque measured at | 1600 rev / min and 1100 rev / min | 31 % more or 500 rev |
Hydraulic system
Pump flow rate | 191 l/min and 284 l/min | 33 % less or 93 l/min |
Dump
Maximum cutting depth | 826 mm and 812.8 mm | 2 % more or 13.2 mm |
8 reasons to buy Volvo G740B:
Operation
Front axle standard operating weight | 5052 kg and 4264 kg | 16 % more or 788 kg |
Rear axle standard operating weight | 11788 kg and 9630 kg | 18 % more or 2158 kg |
Motor
Displacement | 9.6 l. and 5.9 l. | 39 % more or 3.7 l. |
Maximum power | 181.2 kW and 104.4 kW | 42 % more or 76.8 kW |
Gear box
Maximum forward speed | 43.8 km/h and 39.8 km/h | 9 % more or 4.0 km/h |
Maximum reverse gear | 31.4 km/h and 28.5 km/h | 9 % more or 2.9 km/h |
Front Axle
Clearance | 610 mm and 597 mm | 2 % more or 13 mm |
Dump
Blade pulling at maximum weight | 10019.4 kg and 8667.7 kg | 13 % more or 1351.7 kg |
Neutral reasons:
Steerage
Left and right hinge connection | 22 degrees and 22 degrees |
Sizes
Blade base | 2616 mm and 2718 mm |
Wheelbase | 6096 mm and 6248 mm |
Dimensional length | 8458 mm and 9220 mm |
Between tyres width | 2489 mm and 2540 mm |
Operation
Overall standard operating weight | 13894 kg and 16840 kg |
Motor
Manufacturer | Cummins and Volvo |
Power measured at | 2200 rev / min and 2200 rev / min |
Aspiration | turbocharging and turbocharging |
Model | 6B5.9 and D10BGAE2 |
Cylinders number | 6 and 6 |
Hydraulic system
Overflow valve pressure | 17236.9 kPa and 18615.8 kPa |
Type of pump | hydraulic system with load sensing and hydraulic system with load sensing |
Gear box
Transmission type | Volvo 8400 and powershift transmission |
Forward gears number | 8 and 8 |
Reverse gears number | 4 and 4 |
Front Axle
Wheel tilt | 18 degrees and 18 degrees |
General fluctuations | 16 degrees and 16 degrees |
Dump
Mouldboard width | 3658 mm and 3657.6 mm |
Mouldboard height | 635 mm and 736.6 mm |
Mouldboard thickness | 22.2 mm and 25.4 mm |
Left lateral displacement | 774.7 mm and 673.1 mm |
Lateral right shift | 774.7 mm and 673.1 mm |
Lowered blade pressure | 7481.6 kg and 8940.8 kg |
Circle
Diameter | 1683 mm and 1683 mm |
Rotating | 360 degrees and 360 degrees |
Images
Sizes
1. Dimensional length | 8458 mm | 1. Dimensional length | 9220 mm |
2. Between tyres width | 2489 mm | 2. Between tyres width | 2540 mm |
4. Wheelbase | 6096 mm | 4. Wheelbase | 6248 mm |
8. Blade base | 2616 mm | 8. Blade base | 2718 mm |