vs.

      Volvo G710 VHP vs. Volvo G780

      4 reasons to buy Volvo G710 VHP:

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev
      Torque measured at 1600 rev / min and 1300 rev / min 19 % more or 300 rev

      Gear box

      Maximum forward speed 39.8 km/h and 38.3 km/h 4 % more or 1.5 km/h
      Maximum reverse gear 28.5 km/h and 27.4 km/h 4 % more or 1.1 km/h

      8 reasons to buy Volvo G780:

      Operation

      Front axle standard operating weight 6028 kg and 4264 kg 29 % more or 1764 kg
      Rear axle standard operating weight 13360 kg and 9630 kg 28 % more or 3730 kg

      Motor

      Maximum power 156.6 kW and 104.4 kW 33 % more or 52.2 kW
      Displacement 10.8 l. and 5.9 l. 45 % more or 4.9 l.

      Hydraulic system

      Pump flow rate 183 l/min and 191 l/min 4 % less or 8 l/min

      Front Axle

      Clearance 698 mm and 597 mm 14 % more or 101 mm

      Dump

      Maximum cutting depth 838.2 mm and 826 mm 1 % more or 12.2 mm
      Blade pulling at maximum weight 12023.4 kg and 8667.7 kg 28 % more or 3355.7 kg

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 22 degrees

      Sizes

      Between tyres width 2489 mm and 2794 mm
      Wheelbase 6096 mm and 6248 mm
      Dimensional length 8458 mm and 8687 mm
      Blade base 2616 mm and 2718 mm

      Operation

      Overall standard operating weight 13894 kg and 19388 kg

      Motor

      Manufacturer Cummins and Cummins
      Aspiration turbocharging and turbocharging
      Model 6B5.9 and M11

      Hydraulic system

      Overflow valve pressure 17236.9 kPa and 17236.9 kPa
      Type of pump hydraulic system with load sensing and hydraulic system with load sensing

      Gear box

      Transmission type Volvo 8400 and powershift transmission
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      General fluctuations 16 degrees and 16 degrees
      Wheel tilt 18 degrees and 18 degrees

      Dump

      Mouldboard width 3658 mm and 4267.2 mm
      Mouldboard height 635 mm and 787.4 mm
      Mouldboard thickness 22.2 mm and 25.4 mm
      Left lateral displacement 774.7 mm and 673.1 mm
      Lateral right shift 774.7 mm and 673.1 mm
      Lowered blade pressure 7481.6 kg and 10652.6 kg

      Circle

      Diameter 1683 mm and 1692 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8458 mm 1. Dimensional length 8687 mm
      2. Between tyres width 2489 mm 2. Between tyres width 2794 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6248 mm
      8. Blade base 2616 mm 8. Blade base 2718 mm