vs.

      Volvo G710 VHP vs. Volvo G780B

      5 reasons to buy Volvo G710 VHP:

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev
      Torque measured at 1600 rev / min and 1100 rev / min 31 % more or 500 rev

      Hydraulic system

      Pump flow rate 191 l/min and 284 l/min 33 % less or 93 l/min

      Gear box

      Maximum forward speed 39.8 km/h and 38.3 km/h 4 % more or 1.5 km/h
      Maximum reverse gear 28.5 km/h and 27.4 km/h 4 % more or 1.1 km/h

      7 reasons to buy Volvo G780B:

      Operation

      Front axle standard operating weight 5825 kg and 4264 kg 27 % more or 1561 kg
      Rear axle standard operating weight 13733 kg and 9630 kg 30 % more or 4103 kg

      Motor

      Maximum power 181.2 kW and 104.4 kW 42 % more or 76.8 kW
      Displacement 9.6 l. and 5.9 l. 39 % more or 3.7 l.

      Front Axle

      Clearance 698 mm and 597 mm 14 % more or 101 mm

      Dump

      Blade pulling at maximum weight 12359.5 kg and 8667.7 kg 30 % more or 3691.8 kg
      Maximum cutting depth 838.2 mm and 826 mm 1 % more or 12.2 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 22 degrees

      Sizes

      Wheelbase 6096 mm and 6248 mm
      Blade base 2616 mm and 2718 mm
      Dimensional length 8458 mm and 9322 mm
      Between tyres width 2489 mm and 2794 mm

      Operation

      Overall standard operating weight 13894 kg and 19618 kg

      Motor

      Manufacturer Cummins and Volvo
      Model 6B5.9 and D10BGAE2
      Aspiration turbocharging and turbocharging
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump hydraulic system with load sensing and hydraulic system with load sensing
      Overflow valve pressure 17236.9 kPa and 18615.8 kPa

      Gear box

      Transmission type Volvo 8400 and powershift transmission
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 16 degrees and 16 degrees

      Dump

      Left lateral displacement 774.7 mm and 673.1 mm
      Lateral right shift 774.7 mm and 673.1 mm
      Lowered blade pressure 7481.6 kg and 10415.8 kg
      Mouldboard width 3658 mm and 4267.2 mm
      Mouldboard height 635 mm and 787.4 mm
      Mouldboard thickness 22.2 mm and 25.4 mm

      Circle

      Diameter 1683 mm and 1692 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8458 mm 1. Dimensional length 9322 mm
      2. Between tyres width 2489 mm 2. Between tyres width 2794 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6248 mm
      8. Blade base 2616 mm 8. Blade base 2718 mm