vs.

      Volvo G710 vs. Case 865 DHP

      3 reasons to buy Volvo G710:

      Operation

      Front axle standard operating weight 4264 kg and 4250.2 kg 0 % more or 13.8 kg

      Motor

      Torque measured at 1600 rev / min and 1500 rev / min 6 % more or 100 rev

      Dump

      Maximum cutting depth 826 mm and 711.2 mm 14 % more or 114.8 mm

      8 reasons to buy Case 865 DHP:

      Steerage

      Turn radius 7.2 m and 7.7 m 6 % less or 0.5 m

      Operation

      Rear axle standard operating weight 10299.7 kg and 9630 kg 7 % more or 669.7 kg

      Motor

      Maximum power 149.1 kW and 104.4 kW 30 % more or 44.7 kW
      Effective drives torque 7-8 814.8 Nm and 596.6 Nm 27 % more or 218.2 Nm
      Effective speeds output 7-8 149.1 kW and 104.4 kW 30 % more or 44.7 kW

      Hydraulic system

      Pump flow rate 185.5 l/min and 191 l/min 3 % less or 5.5 l/min

      Gear box

      Maximum forward speed 42.8 km/h and 39.8 km/h 7 % more or 3.0 km/h

      Front Axle

      Clearance 622 mm and 597 mm 4 % more or 25 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Dimensional length 8458 mm and 8534 mm
      Between tyres width 2489 mm and 2510 mm
      Wheelbase 6096 mm and 6219 mm
      Blade base 2616 mm and 2562 mm

      Operation

      Overall standard operating weight 13894 kg and 14549.9 kg

      Motor

      Displacement 5.9 l. and 5.9 l.
      Aspiration turbocharging and Turbocharger with air cooling by oncoming air flow
      Manufacturer Cummins and Cummins
      Model 6B5.9 and QSB-5.9
      Power measured at 2200 rev / min and 2200 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump hydraulic system with load sensing and piston type with load sensing

      Gear box

      Maximum reverse gear 28.5 km/h and 28.5 km/h
      Transmission type Volvo 8400 and powershift
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 17.5 degrees
      General fluctuations 16 degrees and 19 degrees

      Dump

      Mouldboard width 3658 mm and 3962 mm
      Mouldboard height 635 mm and 600 mm
      Mouldboard thickness 22.2 mm and 22.2 mm
      Left lateral displacement 774.7 mm and 533 mm
      Lateral right shift 774.7 mm and 686 mm
      Lowered blade pressure 7481.6 kg and 7606 kg

      Circle

      Rotating 360 degrees and 360 degrees
      Diameter 1683 mm and 1752 mm

      Images

      Sizes

      1. Dimensional length 8458 mm 1. Dimensional length 8534 mm
      2. Between tyres width 2489 mm 2. Between tyres width 2510 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6219 mm
      8. Blade base 2616 mm 8. Blade base 2562 mm