vs.

      Volvo G710 vs. Case 865B VHP

      2 reasons to buy Volvo G710:

      Motor

      Torque measured at 1600 rev / min and 1500 rev / min 6 % more or 100 rev

      Dump

      Maximum cutting depth 826 mm and 711.2 mm 14 % more or 114.8 mm

      8 reasons to buy Case 865B VHP:

      Steerage

      Turn radius 7.3 m and 7.7 m 5 % less or 0.4 m

      Operation

      Front axle standard operating weight 5501.6 kg and 4264 kg 22 % more or 1237.6 kg
      Rear axle standard operating weight 10824.5 kg and 9630 kg 11 % more or 1194.5 kg

      Motor

      Effective speeds output 7-8 152.9 kW and 104.4 kW 32 % more or 48.5 kW
      Effective drives torque 7-8 930.1 Nm and 596.6 Nm 36 % more or 333.5 Nm
      Displacement 6.7 l. and 5.9 l. 12 % more or 0.8 l.

      Hydraulic system

      Pump flow rate 185.5 l/min and 191 l/min 3 % less or 5.5 l/min

      Gear box

      Maximum forward speed 42.8 km/h and 39.8 km/h 7 % more or 3.0 km/h

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Dimensional length 8458 mm and 8534 mm
      Between tyres width 2489 mm and 2452 mm
      Wheelbase 6096 mm and 6219 mm
      Blade base 2616 mm and 2562 mm

      Operation

      Overall standard operating weight 13894 kg and 16326.2 kg

      Motor

      Manufacturer Cummins and Case
      Model 6B5.9 and FPT 6.7L
      Aspiration turbocharging and Turbocharger with charge air cooler by oncoming air flow
      Power measured at 2200 rev / min and 2200 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump hydraulic system with load sensing and piston type with load sensing

      Gear box

      Transmission type Volvo 8400 and Powershift transmission with direct drive
      Forward gears number 8 and 8
      Reverse gears number 4 and 4
      Maximum reverse gear 28.5 km/h and 28.5 km/h

      Front Axle

      General fluctuations 16 degrees and 15.3 degrees
      Wheel tilt 18 degrees and 20 degrees

      Dump

      Mouldboard width 3658 mm and 4267.2 mm
      Mouldboard height 635 mm and 600 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Lowered blade pressure 7481.6 kg and 9355.8 kg
      Left lateral displacement 774.7 mm and 533.4 mm
      Lateral right shift 774.7 mm and 685.8 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Diameter 1683 mm and 1752.6 mm

      Images

      Sizes

      1. Dimensional length 8458 mm 1. Dimensional length 8534 mm
      2. Between tyres width 2489 mm 2. Between tyres width 2452 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6219 mm
      8. Blade base 2616 mm 8. Blade base 2562 mm