- Home/
- Comparison/
- Grader/
- Volvo G710 vs. Caterpillar 14H
Volvo G710 vs. Caterpillar 14H
4 reasons to buy Volvo G710:
Steerage
Turn radius | 7.7 m and 7.9 m | 3 % less or 0.2 m |
Motor
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Hydraulic system
Pump flow rate | 191 l/min and 243 l/min | 21 % less or 52 l/min |
Dump
Maximum cutting depth | 826 mm and 438 mm | 47 % more or 388 mm |
10 reasons to buy Caterpillar 14H:
Operation
Front axle standard operating weight | 5305 kg and 4264 kg | 20 % more or 1041 kg |
Rear axle standard operating weight | 13504 kg and 9630 kg | 29 % more or 3874 kg |
Motor
Effective speeds output 7-8 | 179 kW and 104.4 kW | 42 % more or 74.6 kW |
Maximum power | 179 kW and 104.4 kW | 42 % more or 74.6 kW |
Displacement | 10.3 l. and 5.9 l. | 43 % more or 4.4 l. |
Gear box
Reverse gears number | 8 and 4 | 50 % more or 4 |
Maximum forward speed | 42.7 km/h and 39.8 km/h | 7 % more or 2.9 km/h |
Maximum reverse gear | 47.3 km/h and 28.5 km/h | 40 % more or 18.8 km/h |
Front Axle
Clearance | 645 mm and 597 mm | 7 % more or 48 mm |
Dump
Blade pulling at maximum weight | 23886 kg and 8667.7 kg | 64 % more or 15218.3 kg |
Neutral reasons:
Steerage
Left and right hinge connection | 22 degrees and 20 degrees |
Sizes
Blade base | 2616 mm and 2860 mm |
Dimensional length | 8458 mm and 9342 mm |
Between tyres width | 2489 mm and 2817 mm |
Wheelbase | 6096 mm and 6460 mm |
Operation
Overall standard operating weight | 13894 kg and 18809 kg |
Motor
Manufacturer | Cummins and Caterpillar |
Model | 6B5.9 and 3176 ATAAC |
Cylinders number | 6 and 6 |
Hydraulic system
Overflow valve pressure | 17236.9 kPa and 24150 kPa |
Type of pump | hydraulic system with load sensing and axial piston |
Gear box
Transmission type | Volvo 8400 and direct drive, powershift, of planetary type |
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 18 degrees and 18 degrees |
General fluctuations | 16 degrees and 32 degrees |
Dump
Mouldboard width | 3658 mm and 4267 mm |
Lowered blade pressure | 7481.6 kg and 15657 kg |
Mouldboard height | 635 mm and 686 mm |
Mouldboard thickness | 22.2 mm and 25 mm |
Left lateral displacement | 774.7 mm and 650 mm |
Lateral right shift | 774.7 mm and 790 mm |
Circle
Diameter | 1683 mm and 1822 mm |
Images
Sizes
1. Dimensional length | 8458 mm | 1. Dimensional length | 9342 mm |
2. Between tyres width | 2489 mm | 2. Between tyres width | 2817 mm |
4. Wheelbase | 6096 mm | 4. Wheelbase | 6460 mm |
8. Blade base | 2616 mm | 8. Blade base | 2860 mm |