vs.

      Volvo G710 vs. New Holland F200

      2 reasons to buy Volvo G710:

      Motor

      Effective drives torque 7-8 596.6 Nm and 271.2 Nm 55 % more or 325.4 Nm

      Dump

      Maximum cutting depth 826 mm and 712 mm 14 % more or 114 mm

      6 reasons to buy New Holland F200:

      Steerage

      Turn radius 7.3 m and 7.7 m 5 % less or 0.4 m

      Motor

      Displacement 8.3 l. and 5.9 l. 29 % more or 2.4 l.

      Hydraulic system

      Pump flow rate 186 l/min and 191 l/min 3 % less or 5 l/min

      Gear box

      Maximum forward speed 43 km/h and 39.8 km/h 7 % more or 3.2 km/h
      Maximum reverse gear 30.6 km/h and 28.5 km/h 7 % more or 2.1 km/h

      Front Axle

      Clearance 622 mm and 597 mm 4 % more or 25 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Between tyres width 2489 mm and 2650 mm
      Wheelbase 6096 mm and 6219 mm
      Blade base 2616 mm and 2562 mm
      Dimensional length 8458 mm and 8555 mm

      Motor

      Manufacturer Cummins and Cummins
      Model 6B5.9 and 6 CTAA 8.3 2 level
      Power measured at 2200 rev / min and 2200 rev / min
      Cylinders number 6 and 6
      Aspiration turbocharging and turbocharging

      Hydraulic system

      Type of pump hydraulic system with load sensing and full hydraulic system with load sensing
      Overflow valve pressure 17236.9 kPa and 17900 kPa

      Gear box

      Transmission type Volvo 8400 and Powershift transmission with direct drive
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 16 degrees and 19 degrees

      Dump

      Mouldboard thickness 22.2 mm and 22 mm
      Mouldboard width 3658 mm and 4267 mm
      Mouldboard height 635 mm and 671 mm
      Left lateral displacement 774.7 mm and 533 mm
      Lateral right shift 774.7 mm and 686 mm
      Lowered blade pressure 7481.6 kg and 10885 kg

      Circle

      Rotating 360 degrees and 360 degrees
      Diameter 1683 mm and 1753 mm

      Images

      Sizes

      1. Dimensional length 8458 mm 1. Dimensional length 8555 mm
      2. Between tyres width 2489 mm 2. Between tyres width 2650 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6219 mm
      8. Blade base 2616 mm 8. Blade base 2562 mm