vs.

      Volvo G710B vs. Case 845 DHP

      13 reasons to buy Volvo G710B:

      Operation

      Each tandem case fluid volume 100 l. and 28.7 l. 71 % more or 71.3 l.
      Front axle standard operating weight 4394 kg and 3707 kg 16 % more or 687 kg
      Rear axle standard operating weight 10757 kg and 9828 kg 9 % more or 929 kg
      Fuel Capacity 378.5 l. and 340.7 l. 10 % more or 37.8 l.
      Cooling system fluid volume 47 l. and 40 l. 15 % more or 7 l.
      Transmission fluid volume 38 l. and 25 l. 34 % more or 13 l.
      Rear differential/final drive fluid volume 23 l. and 12 l. 48 % more or 11 l.

      Motor

      Maximum power 129 kW and 119.3 kW 8 % more or 9.7 kW
      Effective drives torque 7-8 801.3 Nm and 746 Nm 7 % more or 55.3 Nm
      Displacement 7.1 l. and 6.7 l. 6 % more or 0.4 l.
      Effective speeds output 7-8 129 kW and 119 kW 8 % more or 10 kW

      Gear box

      Maximum reverse gear 28.6 km/h and 28.5 km/h 0 % more or 0.1 km/h

      Dump

      Maximum cutting depth 812.8 mm and 711.2 mm 12 % more or 101.6 mm

      6 reasons to buy Case 845 DHP:

      Operation

      Generator current strength 80 amperes and 75 amperes 6 % more or 5 amperes
      Hydraulic system fluid volume 180 l. and 134 l. 26 % more or 46 l.

      Motor

      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev

      Hydraulic system

      Pump flow rate 191.5 l/min and 284 l/min 33 % less or 92.5 l/min

      Gear box

      Maximum forward speed 42.9 km/h and 40.1 km/h 7 % more or 2.8 km/h

      Circle

      Maximum lifting above ground level 444.5 mm and 431.8 mm 3 % more or 12.7 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Height to cab upper part 3073 mm and 3340 mm
      Dimensional length 9093 mm and 8534 mm
      Between tyres width 2489 mm and 2510 mm
      Wheelbase 6096 mm and 6219 mm
      Blade base 2616 mm and 2562 mm

      Operation

      Tyre size 13.00 x 24, G-2 and 14.0 x 24 12PR TL G2 Firestone
      Operating voltage 24 V and 24 V
      Overall standard operating weight 15150 kg and 13535 kg

      Motor

      Aspiration turbocharging and Turbocharging with charge air cooler
      Manufacturer Volvo and Cummins
      Model D7DGAE2 and QSB 6.7, III Level III certified
      Power measured at 2200 rev / min and 2200 rev / min

      Hydraulic system

      Type of pump hydraulic system with load sensing and Gear pump with locking in the middle position, with load sensing

      Gear box

      Transmission type powershift transmission and Powershift of the camshaft with direct drive with electronic shift control and inching pedal
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 17.5 degrees
      General fluctuations 16 degrees and 19 degrees

      Dump

      Mouldboard width 3657.6 mm and 3658 mm
      Mouldboard height 635 mm and 559 mm
      Mouldboard thickness 22.2 mm and 22.2 mm
      Left lateral displacement 673.1 mm and 533 mm
      Lateral right shift 673.1 mm and 686 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Diameter 1683 mm and 1752.6 mm

      Images

      Sizes

      8. Blade base 2616 mm 8. Blade base 2562 mm
      1. Dimensional length 9093 mm 1. Dimensional length 8534 mm
      2. Between tyres width 2489 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3073 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6219 mm