vs.

      Volvo G710B vs. Volvo G976

      4 reasons to buy Volvo G710B:

      Motor

      Power measured at 2200 rev / min and 1700 rev / min 23 % more or 500 rev

      Front Axle

      Clearance 597 mm and 590 mm 1 % more or 7 mm

      Dump

      Maximum cutting depth 812.8 mm and 775 mm 5 % more or 37.8 mm

      Circle

      Blade tilt front angle 47 degrees and 45 degrees 4 % more or 2 degrees

      18 reasons to buy Volvo G976:

      Operation

      Generator current strength 80 amperes and 75 amperes 6 % more or 5 amperes
      Front axle standard operating weight 5600 kg and 4394 kg 22 % more or 1206 kg
      Rear axle standard operating weight 14200 kg and 10757 kg 24 % more or 3443 kg
      Fuel Capacity 498 l. and 378.5 l. 24 % more or 119.5 l.
      Hydraulic system fluid volume 144 l. and 134 l. 7 % more or 10 l.
      Transmission fluid volume 61 l. and 38 l. 38 % more or 23 l.

      Motor

      Maximum power 195.4 kW and 129 kW 34 % more or 66.4 kW
      Torque measured at 1550 rev / min and 1400 rev / min 10 % more or 150 rev
      Effective drives torque 7-8 1188 Nm and 801.3 Nm 33 % more or 386.7 Nm
      Effective speeds output 7-8 195.4 kW and 129 kW 34 % more or 66.4 kW
      Displacement 9.4 l. and 7.1 l. 24 % more or 2.3 l.

      Hydraulic system

      Pump flow rate 208 l/min and 284 l/min 27 % less or 76 l/min

      Gear box

      Maximum forward speed 43.8 km/h and 40.1 km/h 8 % more or 3.7 km/h
      Maximum reverse gear 30.1 km/h and 28.6 km/h 5 % more or 1.5 km/h

      Dump

      Blade pulling at maximum weight 18147 kg and 9143.1 kg 50 % more or 9003.9 kg

      Circle

      Blade tilt rear angle 6 degrees and 5 degrees 17 % more or 1 degrees
      Maximum radius outside left tyres 1970 mm and 2019.3 mm 2 % less or 49.3 mm
      Right maximum radius outside tyres 1960 mm and 2044.7 mm 4 % less or 84.7 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 21 degrees

      Sizes

      Height to cab upper part 3073 mm and 3225 mm
      Dimensional length 9093 mm and 9500 mm
      Between tyres width 2489 mm and 2780 mm
      Wheelbase 6096 mm and 6531 mm
      Blade base 2616 mm and 2790 mm

      Operation

      Tyre size 13.00 x 24, G-2 and 14:00 x 24, G-2
      Operating voltage 24 V and 24 V
      Overall standard operating weight 15150 kg and 19800 kg
      Cooling system fluid volume 47 l. and 47 l.
      Each tandem case fluid volume 100 l. and 100 l.

      Motor

      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Volvo and Volvo
      Model D7DGAE2 and D9B

      Hydraulic system

      Overflow valve pressure 18615.8 kPa and 20684.3 kPa
      Type of pump hydraulic system with load sensing and axial piston pump

      Gear box

      Transmission type powershift transmission and HTE 840, Sequential direct drive gearbox with shifting under load Volvo
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 16 degrees and 16 degrees

      Dump

      Mouldboard thickness 22.2 mm and 25 mm
      Mouldboard width 3657.6 mm and 3657.6 mm
      Mouldboard height 635 mm and 737 mm
      Left lateral displacement 673.1 mm and 673 mm
      Lateral right shift 673.1 mm and 673 mm
      Lowered blade pressure 7696.6 kg and 9776 kg

      Circle

      Diameter 1683 mm and 1626 mm
      Rotating 360 degrees and 360 degrees
      Left shift 774.7 mm and 775 mm
      Right shift 749.3 mm and 749 mm

      Images

      Sizes

      2. Between tyres width 2489 mm 2. Between tyres width 2780 mm
      3. Height to cab upper part 3073 mm 3. Height to cab upper part 3225 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6531 mm
      8. Blade base 2616 mm 8. Blade base 2790 mm
      1. Dimensional length 9093 mm 1. Dimensional length 9500 mm