vs.

      Volvo G720 VHP vs. John Deere 672D

      14 reasons to buy Volvo G720 VHP:

      Operation

      Each tandem case fluid volume 100 l. and 75.7 l. 24 % more or 24.3 l.
      Front axle standard operating weight 4361 kg and 4358 kg 0 % more or 3 kg
      Cooling system fluid volume 47 l. and 45.4 l. 3 % more or 1.6 l.
      Hydraulic system fluid volume 90 l. and 53 l. 41 % more or 37 l.
      Transmission fluid volume 38 l. and 22.7 l. 40 % more or 15.3 l.

      Motor

      Displacement 8.3 l. and 6.8 l. 18 % more or 1.5 l.
      Effective drives torque 7-8 862.3 Nm and 847.4 Nm 2 % more or 14.9 Nm
      Effective speeds output 7-8 145.4 kW and 138 kW 5 % more or 7.4 kW
      Maximum power 145.4 kW and 138 kW 5 % more or 7.4 kW

      Hydraulic system

      Pump flow rate 191 l/min and 207 l/min 8 % less or 16 l/min

      Gear box

      Maximum forward speed 45.7 km/h and 40 km/h 12 % more or 5.7 km/h

      Front Axle

      Clearance 609.6 mm and 587 mm 4 % more or 22.6 mm

      Circle

      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees
      Blade tilt front angle 45 degrees and 42 degrees 7 % more or 3 degrees

      9 reasons to buy John Deere 672D:

      Steerage

      Turn radius 7.2 m and 7.8 m 8 % less or 0.6 m

      Operation

      Rear axle standard operating weight 10895 kg and 10415 kg 4 % more or 480 kg
      Fuel Capacity 401.2 l. and 387.5 l. 3 % more or 13.7 l.
      Rear differential/final drive fluid volume 36 l. and 23 l. 36 % more or 13 l.

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 40 km/h and 32.7 km/h 18 % more or 7.3 km/h

      Dump

      Blade pulling at maximum weight 19105 kg and 3562.1 kg 81 % more or 15542.9 kg

      Circle

      Maximum radius outside left tyres 2100 mm and 3048 mm 31 % less or 948 mm
      Right maximum radius outside tyres 2080 mm and 3035.3 mm 31 % less or 955.3 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 72 degrees and 22 degrees

      Sizes

      Height to cab upper part 3099 mm and 3180 mm
      Dimensional length 8484 mm and 8804 mm
      Between tyres width 2540 mm and 2490 mm
      Wheelbase 6096 mm and 6120 mm
      Blade base 2591 mm and 2568 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 14774 kg and 15254 kg

      Motor

      Aspiration turbocharging and Turbocharged engine with subsequent cooling of charging air by oncoming air flow
      Manufacturer Cummins and John Deere
      Model 6C8.3 and 6068H
      Cylinders number 6 and 6

      Hydraulic system

      Overflow valve pressure 17236.9 kPa and 18960.6 kPa
      Type of pump hydraulic system with load sensing and variable displacement piston pump

      Gear box

      Transmission type Volvo 8400 and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Mouldboard width 3657.6 mm and 3660 mm
      Mouldboard height 635 mm and 610 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Left lateral displacement 673.1 mm and 680 mm
      Lateral right shift 673.1 mm and 680 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Left shift 774.7 mm and 787 mm
      Right shift 749.3 mm and 724 mm

      Images

      Sizes

      1. Dimensional length 8484 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2490 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3180 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6120 mm
      8. Blade base 2591 mm 8. Blade base 2568 mm