- Home/
- Comparison/
- Grader/
- Volvo G720 vs. John Deere 772CH
Volvo G720 vs. John Deere 772CH
9 reasons to buy Volvo G720:
Operation
Each tandem case fluid volume | 100 l. and 75 l. | 25 % more or 25 l. |
Rear axle standard operating weight | 10415 kg and 10391.8 kg | 0 % more or 23.2 kg |
Cooling system fluid volume | 47 l. and 45.4 l. | 3 % more or 1.6 l. |
Hydraulic system fluid volume | 90 l. and 59 l. | 34 % more or 31 l. |
Motor
Displacement | 8.3 l. and 8.1 l. | 2 % more or 0.2 l. |
Hydraulic system
Pump flow rate | 191 l/min and 207.1 l/min | 8 % less or 16.1 l/min |
Gear box
Maximum forward speed | 45.7 km/h and 41.5 km/h | 9 % more or 4.2 km/h |
Front Axle
Clearance | 609.6 mm and 587 mm | 4 % more or 22.6 mm |
Circle
Blade tilt rear angle | 6.5 degrees and 5 degrees | 23 % more or 1.5 degrees |
13 reasons to buy John Deere 772CH:
Steerage
Turn radius | 6.7 m and 7.8 m | 14 % less or 1.1 m |
Operation
Rear differential/final drive fluid volume | 36 l. and 23 l. | 36 % more or 13 l. |
Front axle standard operating weight | 4631.2 kg and 4361 kg | 6 % more or 270.2 kg |
Fuel Capacity | 401.3 l. and 387.5 l. | 3 % more or 13.8 l. |
Motor
Maximum power | 156.6 kW and 119.3 kW | 24 % more or 37.3 kW |
Effective drives torque 7-8 | 1025 Nm and 759.3 Nm | 26 % more or 265.7 Nm |
Effective speeds output 7-8 | 156.6 kW and 119.3 kW | 24 % more or 37.3 kW |
Gear box
Reverse gears number | 8 and 4 | 50 % more or 4 |
Maximum reverse gear | 41.5 km/h and 32.7 km/h | 21 % more or 8.8 km/h |
Dump
Blade pulling at maximum weight | 19894.6 kg and 3562.1 kg | 82 % more or 16332.5 kg |
Circle
Right maximum radius outside tyres | 2110 mm and 3035.3 mm | 30 % less or 925.3 mm |
Blade tilt front angle | 49 degrees and 45 degrees | 8 % more or 4 degrees |
Maximum radius outside left tyres | 2160 mm and 3048 mm | 29 % less or 888 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 72 degrees and 25 degrees |
Sizes
Height to cab upper part | 3099 mm and 3120 mm |
Dimensional length | 8484 mm and 8610 mm |
Between tyres width | 2540 mm and 2510 mm |
Wheelbase | 6096 mm and 5970 mm |
Blade base | 2591 mm and 2670 mm |
Operation
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 14774 kg and 15023 kg |
Transmission fluid volume | 38 l. and 38 l. |
Motor
Cylinders number | 6 and 6 |
Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator) |
Manufacturer | Cummins and John Deere |
Model | 6C8.3 and 6081H |
Hydraulic system
Type of pump | hydraulic system with load sensing and variable displacement with locking in the middle position |
Overflow valve pressure | 17236.9 kPa and 17581.6 kPa |
Gear box
Transmission type | Volvo 8400 and powershift |
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 18 degrees and 20 degrees |
General fluctuations | 16 degrees and 32 degrees |
Dump
Mouldboard width | 3657.6 mm and 3657.6 mm |
Mouldboard height | 635 mm and 609.6 mm |
Mouldboard thickness | 22.2 mm and 22.4 mm |
Left lateral displacement | 673.1 mm and 683 mm |
Lateral right shift | 673.1 mm and 683 mm |
Circle
Right shift | 749.3 mm and 724 mm |
Rotating | 360 degrees and 360 degrees |
Left shift | 774.7 mm and 787 mm |
Images
Sizes
1. Dimensional length | 8484 mm | 1. Dimensional length | 8610 mm |
2. Between tyres width | 2540 mm | 2. Between tyres width | 2510 mm |
3. Height to cab upper part | 3099 mm | 3. Height to cab upper part | 3120 mm |
4. Wheelbase | 6096 mm | 4. Wheelbase | 5970 mm |
8. Blade base | 2591 mm | 8. Blade base | 2670 mm |