vs.

      Volvo G720 vs. New Holland F200

      9 reasons to buy Volvo G720:

      Operation

      Each tandem case fluid volume 100 l. and 23 l. 77 % more or 77 l.
      Fuel Capacity 387.5 l. and 341 l. 12 % more or 46.5 l.
      Cooling system fluid volume 47 l. and 40 l. 15 % more or 7 l.
      Transmission fluid volume 38 l. and 22 l. 42 % more or 16 l.

      Motor

      Effective drives torque 7-8 759.3 Nm and 271.2 Nm 64 % more or 488.1 Nm

      Gear box

      Maximum forward speed 45.7 km/h and 43 km/h 6 % more or 2.7 km/h
      Maximum reverse gear 32.7 km/h and 30.6 km/h 6 % more or 2.1 km/h

      Circle

      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees
      Blade tilt front angle 45 degrees and 40 degrees 11 % more or 5 degrees

      8 reasons to buy New Holland F200:

      Steerage

      Turn radius 7.3 m and 7.8 m 6 % less or 0.5 m

      Operation

      Hydraulic system fluid volume 95.6 l. and 90 l. 6 % more or 5.6 l.
      Rear differential/final drive fluid volume 25 l. and 23 l. 8 % more or 2 l.

      Hydraulic system

      Pump flow rate 186 l/min and 191 l/min 3 % less or 5 l/min

      Front Axle

      Clearance 622 mm and 609.6 mm 2 % more or 12.4 mm

      Dump

      Maximum cutting depth 712 mm and 444.5 mm 38 % more or 267.5 mm

      Circle

      Right maximum radius outside tyres 2174 mm and 3035.3 mm 28 % less or 861.3 mm
      Maximum radius outside left tyres 1978 mm and 3048 mm 35 % less or 1070 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 72 degrees and 25 degrees

      Sizes

      Height to cab upper part 3099 mm and 3340 mm
      Dimensional length 8484 mm and 8555 mm
      Between tyres width 2540 mm and 2650 mm
      Wheelbase 6096 mm and 6219 mm
      Blade base 2591 mm and 2562 mm

      Operation

      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Cummins and Cummins
      Model 6C8.3 and 6 CTAA 8.3 2 level
      Cylinders number 6 and 6
      Displacement 8.3 l. and 8.3 l.
      Aspiration turbocharging and turbocharging

      Hydraulic system

      Overflow valve pressure 17236.9 kPa and 17900 kPa
      Type of pump hydraulic system with load sensing and full hydraulic system with load sensing

      Gear box

      Transmission type Volvo 8400 and Powershift transmission with direct drive
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 16 degrees and 19 degrees

      Dump

      Mouldboard width 3657.6 mm and 4267 mm
      Mouldboard height 635 mm and 671 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Left lateral displacement 673.1 mm and 533 mm
      Lateral right shift 673.1 mm and 686 mm
      Lowered blade pressure 7582.7 kg and 10885 kg

      Circle

      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8484 mm 1. Dimensional length 8555 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2650 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6219 mm
      8. Blade base 2591 mm 8. Blade base 2562 mm