vs.

      Volvo G720 vs. Volvo G990

      4 reasons to buy Volvo G720:

      Steerage

      Turn radius 7.8 m and 8150 m 100 % less or 8142.2 m

      Hydraulic system

      Pump flow rate 191 l/min and 208 l/min 8 % less or 17 l/min

      Gear box

      Maximum forward speed 45.7 km/h and 44.9 km/h 2 % more or 0.8 km/h
      Maximum reverse gear 32.7 km/h and 31.6 km/h 3 % more or 1.1 km/h

      17 reasons to buy Volvo G990:

      Operation

      Fuel Capacity 498 l. and 387.5 l. 22 % more or 110.5 l.
      Hydraulic system fluid volume 91 l. and 90 l. 1 % more or 1 l.
      Transmission fluid volume 61 l. and 38 l. 38 % more or 23 l.
      Front axle standard operating weight 6200 kg and 4361 kg 30 % more or 1839 kg
      Each tandem case fluid volume 105 l. and 100 l. 5 % more or 5 l.
      Rear axle standard operating weight 15900 kg and 10415 kg 34 % more or 5485 kg

      Motor

      Maximum power 206.6 kW and 119.3 kW 42 % more or 87.3 kW
      Effective drives torque 7-8 1260 Nm and 759.3 Nm 40 % more or 500.7 Nm
      Displacement 9.4 l. and 8.3 l. 12 % more or 1.1 l.
      Effective speeds output 7-8 206.6 kW and 119.3 kW 42 % more or 87.3 kW

      Front Axle

      Clearance 615 mm and 609.6 mm 1 % more or 5.4 mm

      Dump

      Blade pulling at maximum weight 17145 kg and 3562.1 kg 79 % more or 13582.9 kg
      Maximum cutting depth 825 mm and 444.5 mm 46 % more or 380.5 mm

      Circle

      Maximum radius outside left tyres 2260 mm and 3048 mm 26 % less or 788 mm
      Right maximum radius outside tyres 2260 mm and 3035.3 mm 26 % less or 775.3 mm
      Blade tilt front angle 46 degrees and 45 degrees 2 % more or 1 degrees
      Blade tilt rear angle 13 degrees and 6.5 degrees 50 % more or 6.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 72 degrees and 21 degrees

      Sizes

      Height to cab upper part 3099 mm and 3280 mm
      Dimensional length 8484 mm and 9730 mm
      Between tyres width 2540 mm and 2800 mm
      Wheelbase 6096 mm and 6681 mm
      Blade base 2591 mm and 2935 mm

      Operation

      Cooling system fluid volume 47 l. and 47 l.
      Overall standard operating weight 14774 kg and 22100 kg
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Cummins and Volvo
      Cylinders number 6 and 6
      Model 6C8.3 and D9B
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)

      Hydraulic system

      Type of pump hydraulic system with load sensing and axial piston pump
      Overflow valve pressure 17236.9 kPa and 20684.3 kPa

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 4 and 4
      Transmission type Volvo 8400 and HTE 840, Sequential direct drive gearbox with shifting under load Volvo

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 16 degrees and 16 degrees

      Dump

      Left lateral displacement 673.1 mm and 673 mm
      Lowered blade pressure 7582.7 kg and 11058 kg
      Lateral right shift 673.1 mm and 673 mm
      Mouldboard width 3657.6 mm and 4267.2 mm
      Mouldboard height 635 mm and 787 mm
      Mouldboard thickness 22.2 mm and 25 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Left shift 774.7 mm and 762 mm
      Right shift 749.3 mm and 749 mm

      Images

      Sizes

      2. Between tyres width 2540 mm 2. Between tyres width 2800 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3280 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6681 mm
      8. Blade base 2591 mm 8. Blade base 2935 mm
      1. Dimensional length 8484 mm 1. Dimensional length 9730 mm