vs.

      Volvo G720B vs. Caterpillar 120H

      15 reasons to buy Volvo G720B:

      Operation

      Generator current strength 80 amperes and 35 amperes 56 % more or 45 amperes
      Front axle standard operating weight 4472 kg and 3574.3 kg 20 % more or 897.7 kg
      Rear axle standard operating weight 10950 kg and 8944.8 kg 18 % more or 2005.2 kg
      Fuel Capacity 378.5 l. and 340 l. 10 % more or 38.5 l.
      Hydraulic system fluid volume 134 l. and 68 l. 49 % more or 66 l.
      Each tandem case fluid volume 100 l. and 49 l. 51 % more or 51 l.

      Motor

      Maximum power 147.6 kW and 104.4 kW 29 % more or 43.2 kW
      Displacement 7.1 l. and 6.6 l. 7 % more or 0.5 l.
      Effective speeds output 7-8 147.6 kW and 104.4 kW 29 % more or 43.2 kW
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Gear box

      Maximum forward speed 45.9 km/h and 42.6 km/h 7 % more or 3.3 km/h

      Front Axle

      Clearance 610 mm and 608 mm 0 % more or 2 mm

      Dump

      Maximum cutting depth 812.8 mm and 775 mm 5 % more or 37.8 mm

      Circle

      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees
      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees

      9 reasons to buy Caterpillar 120H:

      Operation

      Cooling system fluid volume 40 l. and 28 l. 30 % more or 12 l.
      Rear differential/final drive fluid volume 47 l. and 23 l. 51 % more or 24 l.

      Hydraulic system

      Pump flow rate 148 l/min and 284 l/min 48 % less or 136 l/min

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum reverse gear 33.7 km/h and 32.8 km/h 3 % more or 0.9 km/h

      Dump

      Blade pulling at maximum weight 10661 kg and 9854.7 kg 8 % more or 806.3 kg

      Circle

      Maximum radius outside left tyres 1840 mm and 2019.3 mm 9 % less or 179.3 mm
      Right maximum radius outside tyres 1912 mm and 2006.6 mm 5 % less or 94.6 mm
      Maximum lifting above ground level 457 mm and 444.5 mm 3 % more or 12.5 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 20 degrees

      Sizes

      Height to cab upper part 3099 mm and 3110 mm
      Dimensional length 9119 mm and 8140 mm
      Between tyres width 2540 mm and 2440 mm
      Wheelbase 6096 mm and 5870 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 15422 kg and 11358 kg
      Tyre size 14.00 x 24 , G-2 and 13-24 (10 PR) (G-2)

      Motor

      Torque measured at 1400 rev / min and 1400 rev / min
      Aspiration turbocharging and turbocharging
      Manufacturer Volvo and Caterpillar
      Model D7DGBE2 and 3116 DITA

      Hydraulic system

      Type of pump hydraulic system with load sensing and Axial-piston pump
      Overflow valve pressure 18615.8 kPa and 24131.6 kPa

      Gear box

      Transmission type powershift transmission and direct drive, powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Mouldboard height 635 mm and 610 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Left lateral displacement 673.1 mm and 524 mm
      Lateral right shift 673.1 mm and 660 mm
      Lowered blade pressure 7778.2 kg and 9100 kg
      Mouldboard width 3657.6 mm and 3660 mm

      Circle

      Left shift 774.7 mm and 625 mm
      Right shift 749.3 mm and 628 mm
      Diameter 1683 mm and 1530 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 9119 mm 1. Dimensional length 8140 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3110 mm
      4. Wheelbase 6096 mm 4. Wheelbase 5870 mm