vs.

      Volvo G720B vs. Caterpillar 16H

      9 reasons to buy Volvo G720B:

      Operation

      Hydraulic system fluid volume 134 l. and 129 l. 4 % more or 5 l.
      Generator current strength 80 amperes and 75 amperes 6 % more or 5 amperes

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Dump

      Maximum cutting depth 812.8 mm and 470 mm 42 % more or 342.8 mm

      Circle

      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees
      Maximum radius outside left tyres 2019.3 mm and 2311 mm 13 % less or 291.7 mm
      Right maximum radius outside tyres 2006.6 mm and 2311 mm 13 % less or 304.4 mm
      Maximum lifting above ground level 444.5 mm and 419 mm 6 % more or 25.5 mm
      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees

      16 reasons to buy Caterpillar 16H:

      Operation

      Rear axle standard operating weight 17758 kg and 10950 kg 38 % more or 6808 kg
      Front axle standard operating weight 6982 kg and 4472 kg 36 % more or 2510 kg
      Fuel Capacity 492 l. and 378.5 l. 23 % more or 113.5 l.
      Cooling system fluid volume 46.5 l. and 28 l. 40 % more or 18.5 l.
      Rear differential/final drive fluid volume 114 l. and 23 l. 80 % more or 91 l.
      Each tandem case fluid volume 121 l. and 100 l. 17 % more or 21 l.

      Motor

      Displacement 11.9 l. and 7.1 l. 40 % more or 4.8 l.
      Effective speeds output 7-8 212.5 kW and 147.6 kW 31 % more or 64.9 kW
      Maximum power 212.5 kW and 147.6 kW 31 % more or 64.9 kW
      Effective drives torque 7-8 1550 Nm and 950.4 Nm 39 % more or 599.6 Nm

      Hydraulic system

      Pump flow rate 254 l/min and 284 l/min 11 % less or 30 l/min

      Gear box

      Maximum forward speed 48.1 km/h and 45.9 km/h 5 % more or 2.2 km/h
      Maximum reverse gear 45.7 km/h and 32.8 km/h 28 % more or 12.9 km/h
      Reverse gears number 8 and 4 50 % more or 4

      Front Axle

      Clearance 732 mm and 610 mm 17 % more or 122 mm

      Dump

      Blade pulling at maximum weight 20471 kg and 9854.7 kg 52 % more or 10616.3 kg

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 20 degrees

      Sizes

      Height to cab upper part 3099 mm and 3524 mm
      Dimensional length 9119 mm and 9994 mm
      Between tyres width 2540 mm and 3077 mm
      Wheelbase 6096 mm and 6960 mm
      Blade base 2591 mm and 3071 mm

      Operation

      Overall standard operating weight 15422 kg and 24740 kg
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Volvo and Caterpillar
      Model D7DGBE2 and 3196 ETA

      Hydraulic system

      Type of pump hydraulic system with load sensing and axial piston
      Overflow valve pressure 18615.8 kPa and 24150 kPa

      Gear box

      Forward gears number 8 and 8
      Transmission type powershift transmission and direct drive, powershift, of planetary type

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Mouldboard width 3657.6 mm and 4877 mm
      Mouldboard height 635 mm and 787 mm
      Mouldboard thickness 22.2 mm and 25 mm
      Left lateral displacement 673.1 mm and 650 mm
      Lateral right shift 673.1 mm and 790 mm
      Lowered blade pressure 7778.2 kg and 15831 kg

      Circle

      Diameter 1683 mm and 1822 mm
      Left shift 774.7 mm and 690 mm
      Right shift 749.3 mm and 560 mm

      Images

      Sizes

      1. Dimensional length 9119 mm 1. Dimensional length 9994 mm
      2. Between tyres width 2540 mm 2. Between tyres width 3077 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3524 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6960 mm
      8. Blade base 2591 mm 8. Blade base 3071 mm