vs.

      Volvo G726B vs. Case 885B DHP

      9 reasons to buy Volvo G726B:

      Operation

      Transmission fluid volume 38 l. and 22 l. 42 % more or 16 l.
      Each tandem case fluid volume 100 l. and 60.2 l. 40 % more or 39.8 l.
      Fuel Capacity 378.5 l. and 340.7 l. 10 % more or 37.8 l.

      Motor

      Effective speeds output 7-8 175.2 kW and 159.6 kW 9 % more or 15.6 kW
      Effective drives torque 7-8 1049.4 Nm and 984.3 Nm 6 % more or 65.1 Nm
      Displacement 7.1 l. and 6.7 l. 6 % more or 0.4 l.

      Gear box

      Maximum forward speed 45.9 km/h and 43 km/h 6 % more or 2.9 km/h
      Maximum reverse gear 32.8 km/h and 30.6 km/h 7 % more or 2.2 km/h

      Dump

      Maximum cutting depth 812.8 mm and 711.2 mm 12 % more or 101.6 mm

      8 reasons to buy Case 885B DHP:

      Operation

      Hydraulic system fluid volume 179.8 l. and 134 l. 25 % more or 45.8 l.
      Rear differential/final drive fluid volume 39.7 l. and 23 l. 42 % more or 16.7 l.
      Generator current strength 90 amperes and 80 amperes 11 % more or 10 amperes
      Front axle standard operating weight 5668.1 kg and 4657 kg 18 % more or 1011.1 kg
      Rear axle standard operating weight 12687 kg and 11401 kg 10 % more or 1286 kg
      Cooling system fluid volume 39.7 l. and 28 l. 29 % more or 11.7 l.

      Hydraulic system

      Pump flow rate 185.5 l/min and 284 l/min 35 % less or 98.5 l/min

      Front Axle

      Clearance 622 mm and 610 mm 2 % more or 12 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Height to cab upper part 3099 mm and 3340 mm
      Dimensional length 9119 mm and 8534 mm
      Between tyres width 2540 mm and 2650 mm
      Wheelbase 6096 mm and 6219 mm
      Blade base 2591 mm and 2562 mm

      Operation

      Tyre size 14.00 x 24, G-2 and 20.5-25
      Operating voltage 24 V and 24 V
      Overall standard operating weight 16057 kg and 18355.1 kg

      Motor

      Manufacturer Volvo and Case
      Model D7DGDE2 and FPT 6.7L
      Power measured at 2200 rev / min and 2200 rev / min
      Cylinders number 6 and 6
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)

      Hydraulic system

      Type of pump hydraulic system with load sensing and load sensing, pressure control, with locking in the middle position

      Gear box

      Transmission type powershift transmission and powershift
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      General fluctuations 16 degrees and 15.3 degrees
      Wheel tilt 15 degrees and 20 degrees

      Dump

      Lowered blade pressure 8098.4 kg and 9606.2 kg
      Mouldboard width 3657.6 mm and 4267.2 mm
      Mouldboard height 635 mm and 600 mm
      Mouldboard thickness 22.2 mm and 22.2 mm
      Left lateral displacement 673.1 mm and 533.4 mm
      Lateral right shift 673.1 mm and 685.8 mm

      Circle

      Diameter 1683 mm and 1752.6 mm
      Rotating 360 degrees and 360 degrees
      Maximum lifting above ground level 444.5 mm and 444.5 mm

      Images

      Sizes

      1. Dimensional length 9119 mm 1. Dimensional length 8534 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2650 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6219 mm
      8. Blade base 2591 mm 8. Blade base 2562 mm