vs.

      Volvo G726B vs. Caterpillar 12G

      11 reasons to buy Volvo G726B:

      Operation

      Rear axle standard operating weight 11401 kg and 9130 kg 20 % more or 2271 kg
      Each tandem case fluid volume 100 l. and 64 l. 36 % more or 36 l.
      Generator current strength 80 amperes and 19 amperes 76 % more or 61 amperes
      Fuel Capacity 378.5 l. and 283 l. 25 % more or 95.5 l.
      Hydraulic system fluid volume 134 l. and 76 l. 43 % more or 58 l.
      Front axle standard operating weight 4657 kg and 3570 kg 23 % more or 1087 kg

      Motor

      Maximum power 175.2 kW and 100.7 kW 43 % more or 74.5 kW

      Gear box

      Maximum forward speed 45.9 km/h and 41 km/h 11 % more or 4.9 km/h
      Forward gears number 8 and 6 25 % more or 2

      Dump

      Maximum cutting depth 812.8 mm and 450 mm 45 % more or 362.8 mm

      Circle

      Maximum lifting above ground level 444.5 mm and 438 mm 1 % more or 6.5 mm

      10 reasons to buy Caterpillar 12G:

      Operation

      Cooling system fluid volume 47 l. and 28 l. 40 % more or 19 l.
      Transmission fluid volume 87 l. and 38 l. 56 % more or 49 l.

      Motor

      Displacement 10.5 l. and 7.1 l. 32 % more or 3.4 l.

      Hydraulic system

      Pump flow rate 193 l/min and 284 l/min 32 % less or 91 l/min

      Gear box

      Maximum reverse gear 41 km/h and 32.8 km/h 20 % more or 8.2 km/h
      Reverse gears number 6 and 4 33 % more or 2

      Circle

      Maximum radius outside left tyres 1830 mm and 2019.3 mm 9 % less or 189.3 mm
      Right maximum radius outside tyres 1870 mm and 2006.6 mm 7 % less or 136.6 mm
      Blade tilt front angle 90 degrees and 44 degrees 51 % more or 46 degrees
      Blade tilt rear angle 90 degrees and 6.5 degrees 93 % more or 83.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 50 degrees

      Sizes

      Height to cab upper part 3099 mm and 3330 mm
      Dimensional length 9119 mm and 8310 mm
      Between tyres width 2540 mm and 2410 mm
      Wheelbase 6096 mm and 5920 mm
      Blade base 2591 mm and 2570 mm

      Operation

      Overall standard operating weight 16057 kg and 12700 kg
      Operating voltage 24 V and 24 V

      Motor

      Power measured at 2200 rev / min and 2200 rev / min
      Cylinders number 6 and 6
      Manufacturer Volvo and Caterpillar

      Hydraulic system

      Overflow valve pressure 2700 kPa and 14823.7 kPa
      Type of pump hydraulic system with load sensing and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume

      Gear box

      Transmission type powershift transmission and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 15 degrees and 18 degrees
      General fluctuations 16 degrees and 32 degrees
      Clearance 610 mm and 610 mm

      Dump

      Mouldboard width 3657.6 mm and 3650 mm
      Mouldboard height 635 mm and 610 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Left lateral displacement 673.1 mm and 670 mm
      Lateral right shift 673.1 mm and 520 mm

      Circle

      Diameter 1683 mm and 1530 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 9119 mm 1. Dimensional length 8310 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2410 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3330 mm
      4. Wheelbase 6096 mm 4. Wheelbase 5920 mm
      8. Blade base 2591 mm 8. Blade base 2570 mm